སྒྱུ་རྩལ
མཛེས་སྡུག་དང་བདེ་ཐང
བཟོ་རིག
རིག་གནས་དང་ལོ་རྒྱུས
དགའ་སྟོན
ཁོར་ཡུག
ཟས་དང་བཏུང་རྫས
ཕྱིར་འཕྲུལ་རིག
ཚན་རིག
རྩེད་འགྲན
རིག་རྩལ
གྱོན་རུང
Steel Wire Drawn from Mild Steel Rod
Forge

བཟོས་མཁན

Forge

11. སྤྱི་ཟླ་བཅུ་པ 2026NO
༣༧
༠
༠
༠
༠

Steel Wire Drawn from Mild Steel Rod

The drawplate that turns copper and iron rod into wire works on mild steel too, but steel is stiffer: it needs a smaller step per hole, more lubricant and more frequent annealing. Mild steel is annealed by heating it red and letting it cool slowly, buried in dry wood ash.
བར་མ
Half a day

ལམ་སྟོན

1

Anneal the rod

Heat the mild steel rod to an even red in the forge and bury it in a bucket of dry wood ash to cool slowly, overnight.

གོམ་པ་འདིའི་རྫས་རིགས:

ལྕགས་འཇམ་གྱི་དབྱུག་ཟླུམ།ལྕགས་འཇམ་གྱི་དབྱུག་ཟླུམ།1 མི་ཊར།
ཤིང་སྲ་བའི་ཐལ་བ།ཤིང་སྲ་བའི་ཐལ་བ།2 kg
སོལ་བ།སོལ་བ།2 kg

ལག་ཆས་དགོས་མཁོ:

མགར་བའི་ཐབ་ཁུང་།མགར་བའི་ཐབ་ཁུང་།
མགར་བའི་ལག་བཟུང་།མགར་བའི་ལག་བཟུང་།
ལྕགས་ཀྱི་ཟོམ།ལྕགས་ཀྱི་ཟོམ།
2

Taper the end

File a long taper on the first 3 cm so it passes the first hole.

ལག་ཆས་དགོས་མཁོ:

དར་མའི་ཚོགས་ཆས།དར་མའི་ཚོགས་ཆས།
ལས་ཅོག་གི་འཛིན་ཆས།ལས་ཅོག་གི་འཛིན་ཆས།
3

Wax and draw

Clamp the drawplate in the vise. Wax the rod, push the taper through the first hole it does not slip through, and pull straight out with the draw tongs in one steady pull.

གོམ་པ་འདིའི་རྫས་རིགས:

སྦྲང་ཞུན།སྦྲང་ཞུན།10 g

ལག་ཆས་དགོས་མཁོ:

ལྕགས་སྐུད་འཐེན་ནིའི་ལྕགས་ལེབ།ལྕགས་སྐུད་འཐེན་ནིའི་ལྕགས་ལེབ།
འཐེན་ནིའི་ཀམ།འཐེན་ནིའི་ཀམ།
ལས་ཅོག་གི་འཛིན་ཆས།ལས་ཅོག་གི་འཛིན་ཆས།
ཀོ་བའི་ལས་ལག་ཤུབས།ཀོ་བའི་ལས་ལག་ཤུབས།
4

Down the holes

Draw through each next hole without skipping. After every two holes, coil the wire and anneal it again in the ash.

ལག་ཆས་དགོས་མཁོ:

ལྕགས་སྐུད་འཐེན་ནིའི་ལྕགས་ལེབ།ལྕགས་སྐུད་འཐེན་ནིའི་ལྕགས་ལེབ།
འཐེན་ནིའི་ཀམ།འཐེན་ནིའི་ཀམ།
མགར་བའི་ཐབ་ཁུང་།མགར་བའི་ཐབ་ཁུང་།
ལྕགས་ཀྱི་ཟོམ།ལྕགས་ཀྱི་ཟོམ།
5

Finish

Stop at the size you need, checked with the caliper. Leave it as drawn for stiff wire, or anneal once more for soft binding wire.

ལག་ཆས་དགོས་མཁོ:

ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6ཨང་རྟགས་ཚད་འཇལ་ཆས་ ཨིནཅི 6
6

Troubleshooting

Steel wire drawing troubleshooting.

Flow

Loading...

རྫས་རིགས

4

ལག་ཆས་དགོས་མཁོ

9

འབྲེལ་ཡོད་བིལུ་པིརིན་ཊི

བིལུ་པིརིན་ཊི་འདི་ཚུ་ཐབས་ལམ་དང་རྫས་རིགས། སྤྱི་ཆོས་བགོ་བཤའ་བྱེད

CC0 སྤྱི་དབང

བིལུ་པིརིན་ཊི་འདི་CC0 འོག་བཀྲམས་ཡོད། ཁྱེད་རང་གིས་ཆོག་མཆན་མ་བཞེས་པར་ཕབ་ལེན་དང་བཟོ་བཅོས། བགོ་བཤའ། དགོས་མཁོ་གང་ལའང་བཀོལ་སྤྱོད་བྱས་ཆོག

བཟོ་མཁན་ལ་རྒྱབ་སྐྱོར་བྱེད་པའི་ཆེད་ཁོང་ཚོའི་བིལུ་པིརིན་ཊི་བརྒྱུད་ཐོན་སྐྱེད་ཉོ། བཟོ་མཁན་གྱིས བཟོ་མཁན་གྱི་ཁེ་ཕོགས ཚོང་པས་གཏན་འཁེལ་བྱས་པ། ཡང་ན་བིལུ་པིརིན་ཊི་འདིའི་པར་གསར་བཟོས་ཏེ་ཁྱེད་རང་གི་བིལུ་པིརིན་ཊི་ནང་མཐུད་སྦྲེལ་བྱས་ཏེ་ཡོང་སྒོ་བགོ་བཤའ་བྱེད།

གྲོས་བསྡུར

(0)

ནང་འཛུལ གྲོས་བསྡུར་ནང་མཉམ་ཞུགས་ཆེད

བསམ་ཚུལ་ཚུ་ཐོབ་བཞིན...