艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Adjustable Concave Beater Churn: Beaters You Turn to Meet the Cream at Any Level
A concave beater carries air into cream only where its face meets the cream's surface flat; fixed on its arms, that confines the churn "to a definite and unchangeable quantity of milk."
Thomas G. Clinton, George H. Knight and Edward H. Knight of Cincinnati, Ohio, received US 6,764, dated 2 October 1849, for an adjustable churn-dasher: concave beaters rotating vertically, each mounted between arms so it "can lie between the arms at any desired angle," for instance by "a square mortise in the arm with an octagonal journal to the beater," so the face and the surface can be brought into the same plane at any level of milk. The dasher comes apart for scalding, and they brought no metal into contact with the milk.
This rung works out the angle for a given level, then prints the arms and four concave beaters with octagonal journals, fits them in a box, and makes butter.
中级
About 3 hours, plus printing
说明
1
1
Angle for the level
Angle for the level
正在加载 Jupyter 笔记本…
2
2
Buckets that carry air below the surface before it
Buckets that carry air below the surface before it
The embedded blueprint carries air down in fixed buckets, which works best at one level. Clinton and the Knights make their concave beaters adjustable to any level.
3
3
Read US 6,764
Read US 6,764
"Being permanently fixed to arms extending from the axis of motion, the beater, (if the milk rises above that level) dips into the liquid by its inner edge; and, if the milk falls below the same level, the beater slides into the liquid by its outer edge—thus in both cases leaving the air where it found it; viz—at the surface of the milk."
4
4
Print the parts
Print the parts
Print two sets of arms (/uploads/blueprints/adjustable-concave-beater-churn-arms.stl), each four arms with a square mortise near the end, and four concave beaters on their sides (/uploads/blueprints/adjustable-concave-beater-churn-beater.stl): half-tube troughs with an octagonal journal at each end. Print the crank arm (/uploads/blueprints/adjustable-concave-beater-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
此步骤所需材料：
PETG线材1 个所需工具：
FDM 3D 打印机5
5
Assemble the dasher
Assemble the dasher
Slide the two arm sets onto a 10 mm square hardwood shaft 142 mm apart, mortises in line. Push each beater's octagonal journals into a pair of mortises, turned to the angle the notebook gives for your cream's level, and pin the arms on the shaft with wedges, as theirs.
此步骤所需材料：
硬木销钉1 个
硬木块1 个所需工具：
手锯
砂纸6
6
The box
The box
Take a food-safe box about 200 × 190 × 190 mm. Drill both ends on the axis 100 mm up, pass the shaft through with a leather washer at each end, and glue the crank arm and a dowel handle on.
此步骤所需材料：
食品级贮存容器1 个
皮条1 个
木工胶1 个所需工具：
充电式电钻
钻头套装7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the box with one side off to show the two arm sets on the shaft and the four concave beaters, each turned on its octagonal journals, with the crank.
8
8
Set, crank and make butter
Set, crank and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres and note how far below the shaft the cream stands. Set the beaters to the notebook's angle, crank so the hollow faces come down onto the cream, and time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
此步骤所需材料：
鲜奶油1500 毫升
粗海盐1 个
水1 个所需工具：
留置式探针温度计
秒表
数字厨房秤
大号不锈钢搅拌盆9
9
Few bubbles, beaters that turn on their own
Few bubbles, beaters that turn on their own
Adjustable concave beater churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Thomas G. Clinton, George H. Knight and Edward H. Knight** of Cincinnati, Ohio, received US 6,764, dated 2 October 1849. They also showed cylindrical journals held by pins or wedges, and a form with no shaft from head to head so the butter could gather within the beaters' sweep; they could use irons "at a cost of 18 cents." They claimed making the concave beater adjustable to any desired angle, so the face of the beater and the surface of the milk meet in the same plane at any quantity.
**Honest limits.** A food-safe box and printed parts stand in for their wooden churn; our octagons give settings 45° apart, not any angle. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
9- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1500 毫升占位符
- 1 个占位符
- 1 个占位符
所需工具
9- 占位符
- 占位符
- 占位符
- 1 vendor sell this, none ship to you yet占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。