艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Copper Rivets Headed from Forged Rod
A solid rivet is a shank with a head, set by hammering its tail over. Rivets have been used since the Bronze Age, and copper is one of the usual rivet metals. Cut forged copper rod to length, soften it, and head each piece in a nail header.
The picture: a late medieval wooden knife handle held to its tang by copper-alloy rivets.
初学者
An hour or two
说明
1
1
Cut the blanks
Cut the blanks
Saw the rod into pieces as long as the thickness to be riveted, plus about one shank diameter for the tail, plus the head allowance from step 5.
此步骤所需材料：
铜杆0.5 m所需工具：
钢锯
台虎钳2
2
Anneal
Anneal
Heat the blanks to a dull red and quench them in water. Copper stays soft after this.
此步骤所需材料：
水5 升所需工具：
铁匠炉
铁匠钳
淬火水桶
电焊手套3
3
Head them
Head them
Drop a blank into a header hole of the shank size, set the header over the anvil's pritchel hole, and hammer the standing end into a round head with the ball peen. Knock it out from below.
所需工具：
钉头模板
铁砧
圆头锤4
4
Finish
Finish
File burrs off the shanks and square the tail ends. To set one, rest the head in a rivet set and spread the tail with the ball peen.
所需工具：
金属锉
铆钉工具组圆头锤5
5
Rod for the head
Rod for the head
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。