Dyeing Yellow with Osage Orange — The Brilliant Heartwood Dye of the Americas
Osage orange (Maclura pomifera) is a thorny tree native to the south-central United States — originally growing in a narrow range from eastern Texas through Oklahoma and Arkansas. The Osage people and other Indigenous nations used the tree's dense, flexible wood for making bows (the French name bois d'arc — bowwood — became the Anglicised 'bodark'). They also used the vivid yellow heartwood as a dye source, producing some of the brightest and most lightfast yellows achievable from any plant.
Osage orange heartwood contains morin and other flavonoid pigments that produce an exceptionally vivid, warm yellow-gold on alum-mordanted wool. The colour is often described as fluorescent — it has an almost glowing quality in daylight that few other natural dyes match. What makes osage orange truly remarkable among yellow dyes is its lightfastness: it approaches the permanence of weld and significantly exceeds goldenrod, marigold, or turmeric. This combination of vivid colour and durability made it one of the most valued dye woods of the Americas.
In the 19th century, osage orange became an important commercial dyewood. After the tree was planted widely as a hedgerow plant across the American Midwest (its thorns made effective livestock fencing before barbed wire), the wood became readily available. Dyers used it as a cheaper substitute for the tropical fustic wood (Maclura tinctoria), to which it is closely related. Today, osage orange heartwood is available from woodworkers and specialty dye suppliers as chips or sawdust.
说明
Weigh the osage orange heartwood chips
Weigh the osage orange heartwood chips
Use 50-100% WOF of osage orange heartwood chips or sawdust. For 100 g of wool, weigh out 50-100 g of chips. Osage orange heartwood is a vivid yellow-orange colour — this is the dyeing portion of the wood. The pale sapwood contains little pigment. Good quality chips should be bright yellow when freshly cut, darkening to a deeper orange-gold with age. Sawdust extracts faster than chips but both work well. If you have access to osage orange prunings, the heartwood of even small branches contains usable amounts of dye.
此步骤所需材料：
Osage Orange Heartwood Chips80 克所需工具：
Digital Kitchen ScaleSoak the chips overnight in warm water
Soak the chips overnight in warm water
Place the osage orange chips in a dye pot with 4 litres of warm water and soak overnight (8-12 hours). The water will begin turning a vivid yellow within minutes — osage orange releases colour more readily than most heartwood dyes because its pigments are relatively water-soluble. By morning, the soaking liquid will be an intense golden-yellow. This pre-soak softens the wood fibres and ensures thorough extraction during simmering.
所需工具：
Stock PotSimmer the chips for 60 minutes
Simmer the chips for 60 minutes
Bring the pot to a gentle simmer (80-85°C) and hold for 60 minutes. Stir occasionally. The liquid will deepen to an intensely vivid yellow-gold — one of the most striking dye baths you will encounter from any plant source. Do not boil, as excessive heat can dull the fluorescent quality of the colour. The chips can be simmered a second time in fresh water for a lighter bath. Osage orange is a generous dye source — the chips retain considerable pigment even after the first extraction.
所需工具：
Cooking Thermometer (0-200°C)
Wooden Stirring SpoonStrain out the chips
Strain out the chips
Strain the dye liquor through a fine mesh strainer into a clean pot. If using sawdust rather than chips, strain through muslin cloth to catch the fine particles. Press the chips to extract all the vivid yellow liquid. The strained dye bath should be a deep, clear golden-yellow. Wood chip fragments left in contact with wool during dyeing can cause darker spots at contact points.
所需工具：
Fine Mesh StrainerDye alum-mordanted wool at 80°C for 45 minutes
Dye alum-mordanted wool at 80°C for 45 minutes
Pre-wet the alum-mordanted wool in lukewarm water for 15 minutes, squeeze gently, and lower it into the osage orange dye bath at room temperature. Slowly raise to 80°C over 20 minutes, then hold for 45 minutes. Turn gently every 10 minutes. The wool will absorb colour rapidly, turning a vivid, warm yellow-gold. The alum mordant forms a stable complex with the morin pigment, producing the best lightfastness and the brightest colour. Without mordant, the colour is still yellow but paler and less permanent.
此步骤所需材料：
Wool Yarn Skein (Undyed)100 克
Alum (Potassium Alum)10 克Cool overnight, rinse, and dry
Cool overnight, rinse, and dry
Turn off the heat and let the wool cool in the dye bath overnight. Remove, squeeze gently, and rinse in lukewarm water until the runoff is clear. The final colour is a warm, vivid yellow-gold with an almost luminous quality — osage orange yellow seems to glow in natural light. This colour has excellent lightfastness, comparable to weld and far superior to most flower-based yellows. Osage orange-dyed wool retains its brightness for years with normal use. Dry in shade.
材料
3- 占位符
- 占位符
已连接蓝图材料
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。