艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Fleshing Beam from a Rounded Half-Log
Hides are laid over a beam and scraped: the hair side with a blunt unhairing knife, the flesh side with a sharp fleshing knife. Shave the flat side of a half-log into a smooth round back, and set it sloping on two legs so the top end stands at the worker's hip.
The picture: our diagram of the beam on its legs.
初学者
Half a day
说明
1
1
Round the back
Round the back
Lay the half-log flat side down. Shave off the bark and round the top with the drawknife, then smooth it with the spokeshave so there are no ridges to cut the hide.
此步骤所需材料：
硬木半圆木1 个所需工具：
双柄刮刀
双柄刮刨2
2
Legs
Legs
Saw two legs from shafts. Drill two splayed holes into the underside near one end and drive the legs in, wedged tight.
此步骤所需材料：
笔直的木杆2 个所需工具：
手锯
手摇钻
木槌
直尺3
3
Smooth and set up
Smooth and set up
Sand the top end smooth, stand the beam with its low end on the ground, and trim the legs until the top sits at hip height.
所需工具：
砂纸手锯直尺4
4
Slope
Slope
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。