艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Glass Pipettes: Tube Drawn to a Tip, Graduated by Weighing Water
A pipette is a straight glass tube drawn to a narrow tip: dip it in, close the top with a finger, and let out just the volume you want. Drawn and left plain it is a simple transfer pipette; marked along its length it is a graduated pipette, and a Mohr pipette starts its marks well above the tip and is read as it drains.
The picture: our diagram of a plain and a graduated (Mohr) pipette.
中级
Half an hour per pipette
说明
1
1
Draw the tip
Draw the tip
Heat a band of straight, even tube while turning, take it out and pull a short taper, as for a capillary. Cut it at the taper to leave a tip about 1 mm across.
此步骤所需材料：
玻璃管套件1 个所需工具：
台式玻璃吹制喷灯
金刚石划针
安全眼镜
耐热手套2
2
Finish both ends
Finish both ends
Fire-polish the tip lightly without closing it, and fire-polish the top so a finger seals it well.
所需工具：
台式玻璃吹制喷灯
锉刀（手用锉）3
3
Graduate it (Mohr)
Graduate it (Mohr)
Fill above the top mark, let it drain into a weighed beaker on the balance, stopping each few grams and scratching a line at the level. Keep the first mark well above the tip.
此步骤所需材料：
水0.2 升所需工具：
等臂天平
玻璃烧杯金刚石划针
直尺4
4
Mark spacing
Mark spacing
正在加载 Jupyter 笔记本…
5
5
Use
Use
Hold it upright, tip in the liquid but off the bottom; draw liquid up with a bulb (never by mouth), close the top with your forefinger and let it down to the mark.
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。