艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Iron Rivets and Roves Forged from Rod and Sheet
An iron rivet is a short headed rod; its tail goes through the work and a small iron washer, the rove, and is hammered over it. Medieval boat builders fastened planks this way with iron nails and diamond-shaped roves. Heads are formed in a nail header; roves are cut from iron sheet and punched.
The picture: iron rivets with their roves from a Viking longship, Royal Ontario Museum, Toronto.
中级
A day for a hundred
说明
1
1
Head the rivets
Head the rivets
Heat the end of the wrought iron rod to orange, nick it on the hardy at rivet length plus head stock, drop it into the nail header and spread the head with a few quick blows. Snap it free.
此步骤所需材料：
熟铁圆棒2 m
木炭1 as required所需工具：
铁匠炉
铁匠钳
铁砧剁刀
钉头模板
铁砧
横向楔头锤
电焊手套
安全眼镜2
2
Cut the roves
Cut the roves
Cut the iron sheet into small diamonds with a cold chisel on the anvil.
此步骤所需材料：
铁板（锻打）1 个所需工具：
冷錾铁砧横向楔头锤电焊手套安全眼镜3
3
Punch the roves
Punch the roves
Heat each diamond and punch a hole in the middle, a snug fit for the rivet shank, over the pritchel hole.
所需工具：
铁匠炉
热冲子铁砧横向楔头锤铁匠钳电焊手套安全眼镜4
4
Check and pair
Check and pair
Check the shanks with the caliper and file off burrs. Keep a rove with each rivet. To set one: push it through the work, slip the rove over the tail, trim the tail and hammer it over the rove.
所需工具：
6 英寸数显卡尺5
5
Rod and sheet per rivet
Rod and sheet per rivet
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。