艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Wrought Iron Rod Drawn Down from Bar
Thin iron rod for nails, rivets and bolts is drawn out of thicker bar under the hammer: each blow makes it thinner and longer. A fuller speeds the work on thick stock; the square is knocked to eight sides, then rounded in a swage.
The picture: a hot bar end on the anvil under a swinging hammer.
中级
An afternoon
说明
1
1
Heat the bar
Heat the bar
Bring the end of the wrought iron bar to a bright yellow-orange in the forge.
此步骤所需材料：
锻铁条1 公斤
木炭1 as required所需工具：
铁匠炉
铁匠钳
电焊手套
安全眼镜2
2
Fuller, then flatten
Fuller, then flatten
On thick bar, hammer a row of grooves across it with the fuller or the hammer's peen, then flatten the ridges with the face: the bar grows longer. Turn it a quarter turn and do the same on the next face.
所需工具：
压槽铁（fuller）
铁砧
横向楔头锤铁匠钳电焊手套安全眼镜3
3
Draw to size
Draw to size
Keep drawing on the anvil face, turning a quarter turn every few blows so it stays square. Work only while it glows; reheat as soon as it dulls.
所需工具：
铁匠炉铁砧横向楔头锤电焊手套安全眼镜4
4
Round it
Round it
Knock the corners down to eight sides, then roll and hammer it in a round groove of the swage block until it is round. Check the size with the caliper.
所需工具：
型砧块横向楔头锤
6 英寸数显卡尺电焊手套安全眼镜5
5
Cut to lengths
Cut to lengths
Cut the rod hot on the hardy into lengths and let them cool in air.
所需工具：
铁砧剁刀铁砧横向楔头锤电焊手套安全眼镜6
6
How long the rod comes out
How long the rod comes out
正在加载 Jupyter 笔记本…
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。