艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Riven Hardwood Handle Stock
Tool handles take shock along their length, so handle makers split them from straight logs of tough woods such as ash and hickory: a split follows the grain, and a handle whose fibres run end to end does not snap where sawn grain runs out. Rive the blanks green, shave them roughly to size, and let them dry before final shaping.
初学者
Half a day, plus months drying
说明
1
1
Cut a billet
Cut a billet
Saw a straight, knot-free ash or hickory log to the handle length plus 5 cm.
此步骤所需材料：
硬木原木（栎、槭、山毛榉）1 个所需工具：
双人横割锯
卷尺2
2
Split it
Split it
Split the billet in half with the splitting axe, then into quarters and eighths with the froe and mallet, until each blank is a little larger than the handle.
所需工具：
劈柴斧
劈刀（froe）
木槌
安全眼镜3
3
Shave to rough size
Shave to rough size
Clamp each blank in the shaving horse and remove the bark and the pith edge with the drawknife, following the grain.
所需工具：
削木凳
双柄刮刀4
4
Seal and dry
Seal and dry
Seal the ends and dry the blanks indoors, spaced apart, until the moisture meter reads close to the room's level.
此步骤所需材料：
端面封蜡（石蜡）0.1 升所需工具：
水分测量仪5
5
Final shaping
Final shaping
When dry, true the blanks with the spokeshave and store them ready for handles.
所需工具：
双柄刮刨削木凳
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。