艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Self-Closing Float Dasher Churn: Floats That Open to Churn and Close to Gather
Davis wanted one dasher that would churn "in the most effectual manner," then gather the butter and work out the buttermilk.
Robert W. Davis of Rodgersville, New York, received US 7,233, dated 2 April 1850, for self-adjusting rotary churn-dashers. The dasher's fixed slats are set "at such angles as to force the cream toward the center"; movable floats hinged to its sides stand open when turning that way and move it outward, "which various and contrary motions so agitate it, that the butter is soon formed." Turned backward, the floats close on the slats so the outside forms "a uniform curve concentric to the axis," which throws the butter to the sides and bottom and presses it free of milk.
This rung looks at the floats' swing, then prints the sides, slats and floats, assembles the dasher in a box, and makes butter.
中级
About 4 hours, plus printing
说明
1
1
The floats' swing
The floats' swing
正在加载 Jupyter 笔记本…
2
2
A dasher that churns one way and gathers the other before it
A dasher that churns one way and gathers the other before it
The embedded blueprint reverses fixed paired blades to roll the butter up. Davis lets hinged floats change shape by themselves when the crank is reversed.
3
3
Read US 7,233
Read US 7,233
"In order to gather the butter and work it, the dasher is then turned in the contrary direction, and the movable slats then closing the outside of the slats of the dasher form a uniform curve concentric to the axis and moving with the convex side foremost. By a few revolutions of the dasher the butter is thrown from the center to the sides and bottom of the churn box, and these gathered into a roll."
4
4
Print the parts
Print the parts
Print two side pieces (/uploads/blueprints/self-closing-float-dasher-churn-side.stl), four fixed slats (/uploads/blueprints/self-closing-float-dasher-churn-slat.stl), four curved floats with hinge eyes (/uploads/blueprints/self-closing-float-dasher-churn-float.stl) and the crank arm (/uploads/blueprints/self-closing-float-dasher-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
此步骤所需材料：
PETG线材1 个所需工具：
FDM 3D 打印机5
5
Assemble the dasher
Assemble the dasher
Slide the two side pieces onto a 10 mm square hardwood shaft 148 mm apart and screw the four slats between them. Hang each float between the arms' knuckles on a 3 mm stainless rod as its hinge, so it swings open one way and lies against its slat the other.
此步骤所需材料：
硬木销钉1 个
低碳钢圆棒1 个
机螺钉1 个
木工胶1 个所需工具：
钢锯
螺丝刀套装
手锯6
6
The box
The box
Take a food-safe box about 230 × 190 × 200 mm. Drill both ends on the axis 100 mm up, pass the shaft through with a leather washer at each end, and glue the crank arm and a dowel handle on.
此步骤所需材料：
食品级贮存容器1 个
皮条1 个木工胶1 个所需工具：
充电式电钻
钻头套装7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the box with one side off to show the dasher's side pieces, the fixed slats and the hinged curved floats, and the crank.
8
8
Churn forward, gather backward
Churn forward, gather backward
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank forward, floats open; time until the butter comes. Then crank backward so the floats close and the round dasher gathers the butter into a roll; draw off the buttermilk and keep cranking to work it, as he did. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
此步骤所需材料：
鲜奶油1500 毫升
粗海盐1 个
水1 个所需工具：
留置式探针温度计
秒表
数字厨房秤
大号不锈钢搅拌盆9
9
Floats that won't open or close
Floats that won't open or close
Self-closing float dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Robert W. Davis** of Rodgersville, Steuben County, New York, received US 7,233, dated 2 April 1850. His drawing shows the dasher in a churn box with slats D strengthening it. He claimed "the self adjusting float or slat (C) which opens when churning the cream and closes of itself when the dasher is turned in the opposite direction to gather the butter."
**Honest limits.** A food-safe box and printed parts stand in for his wooden box and dasher. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
10- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 2 个占位符
- 1 个占位符
- 1 个占位符
- 1500 毫升占位符
- 1 个占位符
- 1 个占位符
所需工具
10- 占位符
- 占位符
- 占位符
- 占位符
- 1 vendor sell this, none ship to you yet占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。