艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Split Pins: Half-Round Wire Folded, Pinched and Twisted (Britton 1925)
A split pin is one piece of half-round wire folded in two, flat faces together, so the two legs make a round shank with an eye at the top. Britton's machine cuts the wire, folds it round a pin, pinches the legs together so the eye sits to one side, and twists the eye a quarter turn so it lines up with the split.
Source: William M. Britton, US 1,536,284 (1925). Unknown: the wire's metal and the sizes. Britton gives neither, so they are linked to unknown heads. Picture: the patent's sheet 1.
中级
1 day
说明
1
1
Feed and cut a strip of half-round wire
Feed and cut a strip of half-round wire
Feed half-round wire, flat side down, along the guide until it meets the stop. The knife shears off the strip that makes one pin. Unknown: the metal and the length.
此步骤所需材料：
半圆线材1 as required所需工具：
开口销成型机
未知尺寸
安全眼镜2
2
Fold it round the form
Fold it round the form
Press the die down: its semicircular recess bends both ends of the strip down round the cylindrical form. The middle wraps round to make the eye, with the legs pointing the same way and their flat sides facing.
所需工具：
开口销成型机3
3
Pinch the legs and offset the eye
Pinch the legs and offset the eye
Close the two side dies with the pedal. One stops early and leaves its leg straight, tangent to the form. The other pushes its leg just past the middle, against the first. The legs make a round shank, and the eye stands out to one side.
所需工具：
开口销成型机4
4
Twist the eye a quarter turn and release
Twist the eye a quarter turn and release
With the legs still held, swing the lever through 90°. It turns the die and twists the eye a quarter turn, into the plane of the split. Release the pedal: the form pulls out and the finished pin drops.
所需工具：
开口销成型机未知尺寸此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。