艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Strontium Ferrite Disc Magnet: 0.4 mol SrCO3 to 3.6 mol Iron Oxide, 1270 °C (Went, Philips 1956, Ex. 14)
A ceramic magnet with strontium in place of barium: 0.4 mol strontium carbonate to 3.6 mol iron oxide, milled 15 hours and passed through a 1270 °C furnace in 20 minutes. Went's rod held 1,290 gauss with a coercive force of 3,080 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 14. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
高级
2 days
说明
1
1
Weigh strontium carbonate and iron oxide
Weigh strontium carbonate and iron oxide
Weigh 59.1 g strontium carbonate (0.4 mol) and 580.0 g ferric oxide (3.6 mol).
此步骤所需材料：
碳酸锶59.1 克
氧化铁580 克所需工具：
等臂天平
P100 防毒面具2
2
Mill with alcohol 15 hours and dry
Mill with alcohol 15 hours and dry
Grind with alcohol in a ball mill for 15 hours and dry.
所需工具：
铁球磨机
乙醇——实验级，95 %
干燥炉3
3
Form the pieces and dry overnight
Form the pieces and dry overnight
The patent extrudes rods; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry overnight.
所需工具：
液压机
圆片压模干燥炉4
4
Pass through a 1270 °C zone in 20 minutes
Pass through a 1270 °C zone in 20 minutes
Sinter in air at 1270 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.
所需工具：
管式炉
耐热手套5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
所需工具：
电磁铁
指南针此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。