艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
The Electric Self-Starter: Kettering's Motor-Generator
Volt

创建者

Volt

27. 九月 2026SE
3
0
0
0
0

The Electric Self-Starter: Kettering's Motor-Generator

Early cars were started by hand with a crank handle — hard, and dangerous when an engine kicked back. Charles F. Kettering, at the Dayton Engineering Laboratories Company (Delco), filed in 1911 for a system in which one electric machine starts the engine as a motor and then, driven by it, runs as a generator to recharge the battery and power the lights and ignition. Cadillac fitted it from 1912. His specification gives the trick that made a small machine do both jobs: batteries switched *"in series to give twenty-four volts"* for starting, and six volts when the machine runs as a generator. This rung works out the current a starter draws, runs a hobby motor as both motor and generator, and switches a heavy load with a relay the way a starter solenoid does.
中级
About 3 hours

说明

1

The starting sequence

Blockly 工作区

Loading Blockly workspace...

2

Cranking current

正在加载 Jupyter 笔记本…
3

One machine, motor and generator

Connect a hobby motor to the bench supply and read the current as it runs free, then as you load its shaft with your fingers: current rises with load. That is the motor half. Now disconnect the supply, put the multimeter across the terminals and spin the shaft with the cordless drill: it makes a voltage that rises with speed. That is the generator half. Kettering's machine did both, with separate windings arranged so it worked well in each role.

此步骤所需材料:

Hobby Motor - GearHobby Motor - Gear1 个
跳线跳线1 套

所需工具:

直流电源直流电源
万用表万用表
充电式电钻充电式电钻
数字转速表数字转速表
4

The overrunning clutch that protects the starter

Once the engine fires it spins far faster than the starter can. An overrunning (one-way) clutch in the drive lets the pinion free-wheel so the engine cannot drag the motor to destruction. The embedded blueprint covers how a one-way clutch grips in one direction and slips in the other.
5

Switch a heavy load the way a solenoid does

A starter switch cannot carry hundreds of amps; it carries a few, to a solenoid that closes the heavy contacts. Wire a relay so that a push-button and a small current from the 12 V battery energise its coil, and its contacts switch a 10 W power resistor across the battery. Read the coil current and the load current with the clamp meter: a small current controls a large one. Fuse the load circuit, keep the leads short, and never short a lead-acid battery: it can deliver hundreds of amps and melt a spanner.

此步骤所需材料:

SPDT 继电器SPDT 继电器1 个
Power Resistor Kit - 10W (25 pack)Power Resistor Kit - 10W (25 pack)1 包
跳线跳线1 套

所需工具:

12 V 深循环蓄电池12 V 深循环蓄电池
交直流 600 A 钳形表交直流 600 A 钳形表
万用表万用表
透明安全眼镜透明安全眼镜
6

History and context

**US 1,171,055, 'Engine Starting, Lighting, and Ignition System', Charles F. Kettering; filed 11 April 1911, granted 8 February 1916**, and the companion **US 1,150,523, 'Engine Starting Device', filed 15 June 1911, granted 17 August 1915**, assigned to the Dayton Engineering Laboratories Company. Cadillac made the electric starter standard from 1912, and the hand crank disappeared from cars within a decade. **Honest limits.** A starter is short-duty: cranking for long overheats it. A weak or cold battery cannot deliver the current. And the large currents need heavy cables and sound connections — a corroded terminal is the commonest 'starter fault'.

材料

4

所需工具

7
估计总额
制作者买了什么。未标价的材料,在你购买的地方获取。
$8.17

CC0 公共领域

此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。

通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。

讨论

(0)

登录 加入讨论

加载评论中...