艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
The Spring-Fork Egg Holder: Notches of Different Depths Set the Jaws to the Egg
An egg cup fits one size of egg, and a hot potato or egg must still be lifted to it.
Anthony Iske of Lancaster, Pennsylvania, received US 463,604, dated 17 November 1891, for "a convenient egg-holder and potato-holder adjustable in size to suit such articles of food of varying diameters and adapted to stand upright on a table or to be taken apart and used as a pair of tongs at will." A base with a tubular extension has an internal flange notched in pairs of different depths; a U-shaped spring-fork with spoon-shaped jaws stands in it on a stud, its stems spreading into one pair of notches. Shifted to a deeper pair, the jaws open wider; drawn out through the deepest pair, it is sugar-tongs.
This rung works out how the notch depth sets the jaws, then makes the base from tube and sheet and the fork from spring wire with dished jaws, and holds eggs of two sizes.
中级
About 4 hours
说明
1
1
Notch depth and jaw width
Notch depth and jaw width
正在加载 Jupyter 笔记本…
2
2
Spring tongs before it
Spring tongs before it
The embedded blueprint makes table tongs of one spring. Iske stands such a spring-fork in a notched base so it holds an egg upright, and draws it out as tongs.
3
3
Read US 463,604
Read US 463,604
"B designates a pair of spring-tongs, or a 'spring-fork,' as it may be called, having approximately the shape of a narrow letter U, provided at its upper ends with spoon-shaped jaws B′, for holding eggs or other articles. The lower end b of this part B is enlarged and rounded, so as to fill or nearly fill the interior of the tubular extension A′ from side to side."
"The varying depth of the pairs of notches or recesses a′ a² a³ allows the adjustment of the holder to articles of varying sizes, it being necessary only to shift the spring fork or tongs from one pair of notches to another, which is easily done by first compressing and then turning them."
4
4
Make the holder and hold two eggs
Make the holder and hold two eggs
**Base.** Cut 3 cm of aluminium tube and epoxy it upright on a disc of aluminium sheet with a small hole in the middle as the recess a. Glue a ring of sheet inside the tube's top as the flange, and file three pairs of opposite notches in it, 1, 2.5 and 4 mm deep.
**Spring-fork.** Bend 50 cm of spring steel wire into a narrow U, its bottom rounded to fill the tube, with a short downward stud bent at the bottom that fits the hole. Hammer the wire's upper ends flat and dish them over a ball into spoon-shaped jaws.
**Test.** Stand the fork in the base with the stud in the hole and the stems in the shallowest notches, and set a small egg in the jaws. Squeeze the stems, turn them to the deepest pair, and hold a large egg. Draw the fork out and lift a boiled potato with it as tongs.
此步骤所需材料：
铝管0.03 米
铝板1 个
双组分环氧胶1 个
弹簧钢丝0.5 米
鸡蛋2 个
马铃薯1 个所需工具：
钢锯
铁皮剪
什锦锉套装
锉刀（手用锉）
充电式电钻
钻头套装
圆嘴钳
平口钳
锤子
台虎钳
6 英寸数显卡尺5
5
A holder that wobbles, drops the egg or will not change size
A holder that wobbles, drops the egg or will not change size
Spring-fork egg holder troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Anthony Iske** of Lancaster, Pennsylvania, filed US 463,604 on 29 January 1891; it is dated 17 November 1891. He made the holders of sheet metal and wire, noted that egg-holders of spring-tongs in a base, held by a wedge-shaped plug, were already known from Porter's US 159,213 of 26 January 1875, and did not claim that. His claims cover the spring-tongs with the notched base and flange, the stud and central recess, the grooves of varying depth, and the whole holder with tongs usable alone.
**Honest limits.** Aluminium tube and sheet and a bent spring-wire fork stand in for his sheet-metal holder. The notebook treats the stems as rigid about the stud; its lengths and depths are examples. Your held eggs are the result.
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。