艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Valved Hollow-Staff Plunger Churn: A Valve at the Top, Air Forced Out at the Foot
Ellicott's dasher draws its air down through its own handle.
Peter F. Ellicott of Philadelphia, Pennsylvania, received US 7,454, dated 25 June 1850, for an atmospheric churn: "in any ordinary vertical churn," an upright hollow staff connected at the bottom to a square or round hollow plunger open below, with air holes in its sides "1/2 inch in diameter," and a valve inside the staff at its top "so arranged that when the said staff and plunger are raised, the valve will open," and when forced down "the valve will close, and the atmospheric air in the plunger will be forced through the body of the milk or cream."
This rung works out the air per stroke, then prints the plunger and valve cap, fits them to a hollow staff, and makes butter.
初学者
About 1 hour, plus printing
说明
1
1
Air per stroke
Air per stroke
正在加载 Jupyter 笔记本…
2
2
A hand dasher that pumps air before it
A hand dasher that pumps air before it
The embedded blueprint pumps air with a tube over a loose plunger. Ellicott's air comes down a hollow staff through a valve at its top.
3
3
Read US 7,454
Read US 7,454
"C, Fig. 1 is a square or round dasher or plunger being hollow and open at the lower end with air holes, in the sides, 1/2 inch in diameter, and knobs outside. D, Fig. 2 is a full size section of valve placed on the top of the staff B, Fig. 1."
4
4
Print the parts
Print the parts
Print the hollow plunger open end down (/uploads/blueprints/valved-hollow-staff-plunger-churn-plunger.stl), with its twelve side holes and a socket for the staff, and the valve cap (/uploads/blueprints/valved-hollow-staff-plunger-churn-valve-cap.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
此步骤所需材料：
PETG线材1 个所需工具：
FDM 3D 打印机5
5
Staff and valve
Staff and valve
Cut a length of 12–13 mm food-grade tube as the hollow staff, as long as the churn is deep plus 150 mm, and glue it into the plunger's socket. Glue a small leather flap inside the valve cap over its port, hinged on the cap's pin, so it lifts to let air in as the staff rises and seats as it falls; glue the cap on the staff's top.
此步骤所需材料：
PVC 管1 个
皮条1 个
双组分环氧胶1 个所需工具：
钢锯
砂纸6
6
The churn
The churn
Drill a food-grade bucket's lid at the centre for the staff, a little larger than it.
此步骤所需材料：
20 升水桶1 个所需工具：
充电式电钻
开孔器套装7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the churn cut away to show the hollow plunger with its side holes, the hollow staff through the lid and the valve cap on top.
8
8
Dash and make butter
Dash and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the staff up and down; bubbles should burst from the plunger's holes on each down-stroke. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
此步骤所需材料：
鲜奶油2000 毫升
粗海盐1 个
水1 个所需工具：
留置式探针温度计
秒表
数字厨房秤
大号不锈钢搅拌盆9
9
No bubbles, cream up the staff
No bubbles, cream up the staff
Valved hollow-staff plunger churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Peter F. Ellicott** of Philadelphia, Pennsylvania, received US 7,454, dated 25 June 1850. His drawing shows the plunger with knobs outside and a full-size section of the valve. He claimed "a hollow staff connected with a square or round hollow plunger, with a valve placed at the top, or at any point inside of said staff," to be used in any vessel containing milk or cream.
**Honest limits.** Food-grade tube and printed parts stand in for his staff, plunger and valve; our holes are smaller than his half inch. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
8- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 2000 毫升占位符
- 1 个占位符
- 1 个占位符
所需工具
9- 占位符
- 占位符
- 占位符
- 1 vendor sell this, none ship to you yet占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。