KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Retrofocus Wide-Angle Lens
Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length.
**US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.)
**You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Anfänger
90 minutes
Anweisungen
1
1
Two lenses, reversed
Two lenses, reversed
Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.
Materialien für diesen Schritt:
Konkavlinse1 Stück
Satz Sammellinsen1 SetBenötigte Werkzeuge:
Optische Bank mit Schiene
Linsenhalter-Set2
2
Find the focus
Find the focus
Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.
Materialien für diesen Schritt:
Rolle Schnittmuster-Transparentpapier1 Blatt
Malerkrepp1 RolleBenötigte Werkzeuge:
Stahllineal3
3
Compare one lens
Compare one lens
Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.
Benötigte Werkzeuge:
Stahllineal4
4
Fit the mirror
Fit the mirror
Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.
Materialien für diesen Schritt:
Planspiegel1 Stück5
5
Back focus vs focal length
Back focus vs focal length
Jupyter-Notebook wird geladen …
6
6
History & Context
History & Context
**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror.
Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.

Materialien
5- 1 StückPlatzhalter
- 1 SetPlatzhalter
- Platzhalter
- 1 RollePlatzhalter
- 1 StückPlatzhalter
Benötigte Werkzeuge
3- Optische Bank mit Schiene10% ProvisionPlatzhalter
- Linsenhalter-Set10% ProvisionPlatzhalter
- Platzhalter
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

