KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Building a Qanun — The Plucked Zither with Microtone Levers
Build a qanun: a flat trapezoidal zither of many string courses, plucked with finger picks — the plucked cousin of the hammered santur. Its secret is a bank of little levers (mandal) that raise or lower each course by a microtone, flipped mid-performance to change the mode. A serious maker build in the plucked zither and how a lever re-tunes a string in an instant.
Fortgeschritten
Several hours over several sessions
Anweisungen
1
1
A zither you pluck, with levers
A zither you pluck, with levers
The qanun is a flat trapezoidal zither with dozens of string courses, plucked with picks on your fingers. Rows of little levers let you re-tune any course by a microtone in an instant to change the mode.
2
2
Build the trapezoidal box
Build the trapezoidal box
Build a shallow trapezoidal box with a thin wooden soundboard. On a real qanun part of the board is covered with fish-skin, over which the bridge stands.
Materialien für diesen Schritt:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 Stück
Dry Softwood Board1 Stück
PVA Wood Glue1 StückBenötigte Werkzeuge:
Hacksaw3
3
Set the pins and string it
Set the pins and string it
Fit tuning pins along one slanted side and hitch pins on the other, and string the instrument in courses of three strings tuned together — a full qanun has around seventy strings.
Materialien für diesen Schritt:
Tuning Pegs9 Stück
Steel Music Wire 0.032"1 StückBenötigte Werkzeuge:
Awl4
4
Stand the bridge
Stand the bridge
Stand a long wooden bridge across the skin-covered part of the soundboard so all the courses press down on it, feeding their vibration into the skin and box.
Benötigte Werkzeuge:
Sloyd Carving Knife5
5
Fit the mandal levers
Fit the mandal levers
At the tuning end, fit a bank of small metal levers (mandal) under each course. Flipping a lever shortens the vibrating length of that course by a tiny, fixed amount — raising it a microtone.
Materialien für diesen Schritt:
Bronze Wire1 StückBenötigte Werkzeuge:
Metal File6
6
Tune the courses
Tune the courses
Tune every course to the scale with its pins, then set the mandal levers for the mode (maqam) you want to play.
7
7
Play with finger picks
Play with finger picks
Wear a pick on each index finger and pluck the courses, the two hands answering each other across the strings.
8
8
Flip a lever, change the note
Flip a lever, change the note
Mid-tune, flip a mandal lever to shift a course up or down a microtone. This is how a qanun player slides between maqamat without stopping to re-tune.
9
9
Compendium — the lever that re-tunes a string
Compendium — the lever that re-tunes a string
The qanun is a plucked box zither — the same idea as the langspil, but with many courses of strings across a wide trapezoidal soundboard, and plucked with finger picks rather than a hammer, which makes it the exact plucked twin of the hammered santur that shares its shape. A string's pitch depends on its length, tension and mass, and the qanun's mandal levers are a beautifully simple way to change one of these on the fly: each lever, when flipped up, presses down near one end of a course and shortens its vibrating length by a small fixed amount, raising that course's pitch by a microtone; flip it back and the full length returns. Because Arabic and Turkish music uses many microtonal notes and shifts between modes (maqamat) within a single piece, a qanun carries a whole bank of these levers, several per course, so the player can nudge individual notes up or down by tiny steps in an instant without ever re-tuning by ear. The bridge stands on a patch of stretched skin so the strings drive a membrane as well as the soundboard, giving the qanun its bright, ringing shimmer. Its cousins are the santur, the langspil and every box zither, and its lever trick is a mechanical relative of the harp's pedals and the guitar's capo — all quick ways to retune strings without turning a peg.
Materialien
6- Platzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 9 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Building a Bağlama — The Turkish Long-Necked Lute with Movable Frets

Building a Santur — The Persian Hammered Dulcimer

Building a Charango — The Little High Lute of the Andes

Building a Langspil — The Icelandic Drone Zither

Building a Khaen — The Lao Free-Reed Mouth Organ

Building a Cajón — The Peruvian Box Drum You Sit On
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.