KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Condenser Worm: Copper Tube Coiled in a Water Tub
Forge

Erstellt von

Forge

14. Oktober 2026NO
21
0
0
0
0

Condenser Worm: Copper Tube Coiled in a Water Tub

A still's vapour becomes liquid again in the worm: a copper tube coiled in a tub of cold water. Ure (1839) describes copper stills with a capital and worm, and retorts piped to a worm-tub. Fill copper tube with dry sand so it bends without kinking, wind it round a wooden drum with a steady fall, and set it in a tub with the outlet through the side near the bottom. The picture: our diagram, the worm in its tub, vapour in at the top and liquid out at the bottom.
Fortgeschritten
A day

Anweisungen

1

Fill the tube

Cork one end of the copper tube, fill it with dry sand tamped down, and cork the other end.

Materialien für diesen Schritt:

KupferrohrKupferrohr8 m
SandSand2 kg
KorkenKorken2 Stück

Benötigte Werkzeuge:

Holzhammer (Klüpfel)Holzhammer (Klüpfel)
2

Wind the coil

Saw a log into a drum about 30 cm across (our size). Anneal the tube in the fire if it is stiff, then wind it slowly round the drum, letting each turn fall about 5 cm, so the liquid always runs downhill.

Materialien für diesen Schritt:

Laubholzstämme (Eiche, Ahorn, Buche)Laubholzstämme (Eiche, Ahorn, Buche)1 Stück

Benötigte Werkzeuge:

HandsägeHandsäge
SchmiedeesseSchmiedeesse
Hitzebeständige HandschuheHitzebeständige Handschuhe
3

Empty the sand

Slide the coil off the drum, pull the corks and shake and wash out all the sand.

Materialien für diesen Schritt:

WasserWasser5 Liter

Benötigte Werkzeuge:

EimerEimer
4

Set it in the tub

Drill the tub near its bottom for the outlet, pass the lower end out through it and seal the hole with a cork and tallow. Fill the tub with cold water; renew the water as it warms.

Materialien für diesen Schritt:

KorkenKorken1 Stück
Tierisches Fett (Talg)Tierisches Fett (Talg)0.05 kg
WasserWasser100 Liter

Benötigte Werkzeuge:

BütteBütte
HandbohrerHandbohrer
5

Tube for the coil

Jupyter-Notebook wird geladen …

Materialien

6

Benötigte Werkzeuge

7

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...