KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Fire Pit: a Shallow Pit Ringed with Stones
Woody

Erstellt von

Woody

14. Oktober 2026NO
16
0
0
0
0

Fire Pit: a Shallow Pit Ringed with Stones

A fire pit contains a fire and keeps it from spreading. The simplest is a hole dug in the ground; a ring of stones makes a fire ring. Place it at least three metres from any building, clear the ground round it, dig a shallow pit and ring it with dry stones; stones can burst when heated, so choose them with care. The picture: a stone-ringed fire pit beside a forest trail.
Anfänger
An hour or two

Anweisungen

1

Choose the place

Pick level, open ground at least three metres from buildings, with nothing that can catch overhead. Cut and lift the turf and clear a wide circle down to bare soil.

Benötigte Werkzeuge:

SpatenSpaten
2

Dig the pit

Dig a shallow pit about 80 cm across and 15 cm deep (our size) and pile the soil aside.

Benötigte Werkzeuge:

SpatenSpaten
SchaufelSchaufel
3

Ring it with stones

Set a ring of stones round the edge, bedded into the soil so they do not roll. Use stones that have been lying dry; stones from streams or wet ground hold water and are more likely to burst when heated (our caution).

Materialien für diesen Schritt:

SteineSteine15 Stück

Benötigte Werkzeuge:

SchaufelSchaufel
4

Keep water by

Keep a bucket of water beside it whenever it is lit, and put the fire out fully with water and stirring before leaving it.

Materialien für diesen Schritt:

WasserWasser10 Liter

Benötigte Werkzeuge:

MetalleimerMetalleimer
5

Stones for the ring

Jupyter-Notebook wird geladen …

Materialien

2
  • 15 Stück
    Platzhalter
  • 10 Liter
    Platzhalter

Benötigte Werkzeuge

3

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...