KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Machete to a Relief Specification
Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Erfahren
Factory process
Anweisungen
1
1
Forge the blade
Forge the blade
Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.
Materialien für diesen Schritt:
Knüppel aus hochgekohltem Stahl1 StückBenötigte Werkzeuge:
Schmiedeesse
Schwanzhammer2
2
Harden and temper
Harden and temper
Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.
Benötigte Werkzeuge:
Schmiedeesse
Rockwell-Härteprüfgerät3
3
Fit the handle
Fit the handle
Fit the wooden handle into the grooves and fix it with three steel rivets and washers.
Materialien für diesen Schritt:
Hartholzstiel-Rohling1 Stück
Stahlnieten3 Stück
Unterlegscheibe3 Stück4
4
Check
Check
Check the edge for dents and the hardness near the edge.
Benötigte Werkzeuge:
Rockwell-HärteprüfgerätMaterialien
4- Platzhalter
- 1 StückPlatzhalter
- 3 StückPlatzhalter
- 3 StückPlatzhalter
Benötigte Werkzeuge
3- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.


