Zusammenarbeit
KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Gas Washing Bottle: a Single-Neck Bottle Made into a Safety Wash-Bottle (Gattermann, 1901)
A gas washing bottle that cannot suck back. A plain single-neck bottle is closed with a two-hole cork: through one hole a wide straight tube, and through it a narrow delivery tube bent at a right angle that reaches almost to the bottom; through the other the outlet. Gas bubbles up through the liquid (for example concentrated sulphuric acid to dry it). If the gas flow falters and the far vessel starts to suck, air enters between the two tubes and relieves it, so no liquid is drawn back.
Result: a safety wash-bottle for washing or drying a gas stream.
Source: L. Gattermann, The Practical Methods of Organic Chemistry (1901), pp. 344-345, Fig. 84. Unknown: sizes. Picture: the book's Figs. 82-85.
Anfänger
Unknown
Anweisungen
1
1
Cut and bend the tubes
Cut and bend the tubes
Cut a straight glass tube as wide as possible to pass through the cork. Cut a narrower delivery tube, long enough to reach almost to the bottom of the bottle, and bend it at a right angle in the flame. Bend an outlet tube. Not given: bores and lengths.
Materialien für diesen Schritt:
Glasrohr3 wide tube, delivery tube, outletBenötigte Werkzeuge:
Bügelsäge (Metallsäge)
Bunsenbrenner2
2
Assemble and use it
Assemble and use it
Bore a cork with two holes to fit a single-neck bottle. Push the wide straight tube through one hole and the outlet through the other. Pass the delivery tube down through the wide tube so it reaches almost to the bottom of the bottle. Pour in the washing or drying liquid (for example concentrated sulphuric acid to dry hydrochloric acid gas) so the delivery tube dips in it, and pass the gas in through the delivery tube and out through the outlet. If the gas current becomes irregular and the far vessel starts to suck back, air enters between the delivery tube and the wide tube and relieves it, so no liquid is drawn back. Not given: the bottle size.
Materialien für diesen Schritt:
Glasflasche (klar)1 single-neck bottle
Korken1 two-holeBenötigte Werkzeuge:
KorkbohrerMaterialien
3- 3 wide tube, delivery tube, outletPlatzhalter
- 1 single-neck bottlePlatzhalter
- 1 two-holePlatzhalter
Benötigte Werkzeuge
3- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.