KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Passive Autofocus (Two-Array Comparison)
Mark

Erstellt von

Mark

22. September 2026FI
0
0
0
0
0

Passive Autofocus (Two-Array Comparison)

Norman Stauffer at Honeywell built a focus detector from two rows of tiny light sensors side by side on one chip. In his FIGURE 2 each row views the subject through its own small lens, a short distance from the other - like the two windows of a rangefinder. How far one row's picture is shifted against the other's gives the subject's distance, and the camera sets the taking lens to match, without trial and error. Compact cameras from 1977 used it; later SLRs moved the same comparison behind the taking lens itself (phase detection). **US 4,002,899**, "Focus detecting apparatus", Stauffer, assigned to Honeywell, filed 31. October 1975, granted 11. January 1977: "radiation responsive elements formed on a single planar substrate and divided into two similar coplanar detector arrays lying immediately adjacent each other". **You see the principle with a card**: a two-hole mask gives a lens two viewpoints, just as Stauffer's two lenses do; out of focus the point splits in two, and which spot vanishes when you cover one hole tells you which way to focus.
Fortgeschritten
90 minutes

Anweisungen

1

Make the two-hole mask

Cut a card disc to fit a lens holder. Punch two 3 mm holes 20 mm apart, symmetric about the centre.

Materialien für diesen Schritt:

Schwarzer KartonSchwarzer Karton1 Blatt

Benötigte Werkzeuge:

BastelmesserBastelmesser
StahllinealStahllineal
2

A point of light

Cover the torch with foil pierced by one pin-sized hole. Put it 2 m from the bench in a dim room.

Materialien für diesen Schritt:

AluminiumfolieAluminiumfolie1 Blatt
MalerkreppMalerkrepp1 Rolle

Benötigte Werkzeuge:

LED-InspektionsleuchteLED-Inspektionsleuchte
Bandmaß (Rollmeter)Bandmaß (Rollmeter)
3

Split and join

Mount a 100 mm convex lens with the mask right in front of it, and a tracing-paper screen behind. Slide the screen: two spots merge into one exactly at focus. Measure their separation 5 and 10 mm either side of focus.

Materialien für diesen Schritt:

Satz SammellinsenSatz Sammellinsen1 Set
Rolle Schnittmuster-TransparentpapierRolle Schnittmuster-Transparentpapier1 Blatt

Benötigte Werkzeuge:

Optische Bank mit SchieneOptische Bank mit Schiene
Linsenhalter-SetLinsenhalter-Set
StahllinealStahllineal
4

Which way?

With the screen too close, cover the left hole and note which spot disappears. Repeat with the screen too far. The answer flips: that is the direction signal phase detection gives for free.
5

Triangles and correlation

Jupyter-Notebook wird geladen …
6

History & Context

**What the patent specifies:** two similar, adjacent, coplanar arrays of radiation-sensitive elements on one substrate, whose outputs are compared to measure distance or focus. **Modern build (derived):** a Scheiner two-hole mask - two viewpoints and an image shift, made visible. Christoph Scheiner described the two-hole experiment in 1619 to study the eye's focusing. Honeywell's chips put it into cameras; today's phones put phase-detection pixels directly into the image sensor. Its limits: it needs contrast (a blank wall defeats it) and precise alignment between the detector and the lens.
Schritt 6 - Image 1

Materialien

5

Benötigte Werkzeuge

6

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...