KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
A beater spun in a round bowl soon drags the whole mixture round with it.
Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds."
This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
Fortgeschritten
About 4 hours, plus printing
Anweisungen
1
1
Tip speed and the corners
Tip speed and the corners
Jupyter-Notebook wird geladen …
2
2
A geared beater a month before it
A geared beater a month before it
The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3
3
Read US 24,134
Read US 24,134
"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4
4
Print the dasher
Print the dasher
Print the stepped double-spiral dasher. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Materialien für diesen Schritt:
PETG-Filament1 StückBenötigte Werkzeuge:
FDM-3D-Drucker5
5
Print the dasher
Print the dasher
The dasher, printed as step 4 describes.
6
6
Build the box
Build the box
Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.
Materialien für diesen Schritt:
Sperrholzplatte1 Stück
Holzschraube #8 x 1"1 Stück
Silikondichtmasse1 StückBenötigte Werkzeuge:
Laubsäge (Schweifsäge)
Akkubohrschrauber
Bohrersatz
Schraubendreher-Satz
Lineal7
7
Fit the shaft and gears
Fit the shaft and gears
Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.
Materialien für diesen Schritt:
Hartholzblock1 Stück
Rundstahl (Baustahl)1 Stück
Kegelradsatz (Stahl, 1:1)1 Stück
Zweikomponentenepoxid1 Stück
Unterlegscheibe1 StückBenötigte Werkzeuge:
Bügelsäge (Metallsäge)AkkubohrschrauberBohrersatz
Schraubstock8
8
The patent drawing
The patent drawing
US 24,134 drawing sheet, public domain (expired patent).
9
9
Square box against round bowl
Square box against round bowl
Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
Materialien für diesen Schritt:
Ei4 StückBenötigte Werkzeuge:
Große Rührschüssel aus Edelstahl
Stoppuhr10
10
A dasher that swirls, scrapes or slips
A dasher that swirls, scrapes or slips
Stepped spiral egg beater troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.
Materialien
10- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 4 StückPlatzhalter
Benötigte Werkzeuge
10- Platzhalter
- Platzhalter
- 1 vendor sell this, none ship to you yetPlatzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Designdateien
1Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.