KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Woody

Erstellt von

Woody

6. Oktober 2026NO
32
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Anfänger
About 2 hours

Anweisungen

1

How high the wick lifts

Jupyter-Notebook wird geladen …
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Materialien für diesen Schritt:

BlechdoseBlechdose1 Stück

Benötigte Werkzeuge:

BlechschereBlechschere
Feilen (Handfeile)Feilen (Handfeile)
LinealLineal
LederarbeitshandschuheLederarbeitshandschuhe
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Materialien für diesen Schritt:

AluminiumblechAluminiumblech1 Stück

Benötigte Werkzeuge:

BlechschereBlechschere
AkkubohrschrauberAkkubohrschrauber
BohrersatzBohrersatz
Feilen (Handfeile)Feilen (Handfeile)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Materialien für diesen Schritt:

EinmachglasEinmachglas1 Stück
ZweikomponentenepoxidZweikomponentenepoxid1 Stück
MaschinenschraubenMaschinenschrauben1 Stück
GummiplatteGummiplatte1 Stück

Benötigte Werkzeuge:

BastelmesserBastelmesser
Schraubendreher-SatzSchraubendreher-Satz
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Materialien für diesen Schritt:

Jute / SackleinenJute / Sackleinen1 Stück

Benötigte Werkzeuge:

SchereSchere
LinealLineal
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
DesigndateiBLENDCC0 - Free
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Schritt 9 - Image 1

Materialien für diesen Schritt:

LeinölfirnisLeinölfirnis1 Stück
SperrholzplatteSperrholzplatte1 Stück
BaumwolllappenBaumwolllappen1 Stück

Benötigte Werkzeuge:

Digitale KüchenwaageDigitale Küchenwaage
StoppuhrStoppuhr
Bandmaß (Rollmeter)Bandmaß (Rollmeter)
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Materialien

10

Benötigte Werkzeuge

12

Designdateien

1

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...