KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Variable Contrast Paper: One Emulsion in Five Parts Dyed 30, 15, 6, 2 and 0 mg per Litre (Schwarz, Bell & Howell, US 2,620,272)
Charlie

Erstellt von

Charlie

31. Oktober 2026DE
0
0
0
0
0

Variable Contrast Paper: One Emulsion in Five Parts Dyed 30, 15, 6, 2 and 0 mg per Litre (Schwarz, Bell & Howell, US 2,620,272)

Variable contrast paper lets one box of paper print hard or soft: the colour of the printing light chooses. Schwarz split one emulsion into parts, dyed each with a halving dose of a green-sensitising dye, and blended them back. Blue light then works on every grain and gives hard prints; green light reaches only the dyed grains and gives soft ones, with smooth steps between. Result: variable contrast paper, hard through a blue or magenta filter, softer through yellow, softest through orange or light red. Source: Schwarz, US 2,620,272 (Bell & Howell, 1952), Example 3. Unknown: the emulsion and the dye, as the patent gives no recipe for either. Not given: dye solvent, coating thickness, drying. Picture drawn by Youblob.
Erfahren
1 day

Anweisungen

1

Divide the emulsion

Warm a fine-grain bromide emulsion of low iodide content until liquid and divide it into five equal parts. Ours: 1 litre each, working in the dark.

Materialien für diesen Schritt:

Feinkörnige Silberbromidiodid-EmulsionFeinkörnige Silberbromidiodid-Emulsion5 Liter

Benötigte Werkzeuge:

BecherglasBecherglas
Großer Topf (unten, für das Wasserbad)Großer Topf (unten, für das Wasserbad)
ThermometerThermometer
Lichtdichter KastenLichtdichter Kasten
2

Dye four parts, each less

Stir the Formula 3 dye into four of the parts: 30 mg per litre, 15 mg, 6 mg and 2 mg. Leave the fifth part undyed. Dye solvent: not given.

Materialien für diesen Schritt:

Pentadecyl-Thiacarbocyanin-FarbstoffPentadecyl-Thiacarbocyanin-Farbstoff53 mg

Benötigte Werkzeuge:

BalkenwaageBalkenwaage
GlasrührstabGlasrührstab
3

Blend

Mix the five parts together into one emulsion.

Benötigte Werkzeuge:

BecherglasBecherglas
GlasrührstabGlasrührstab
Großer Topf (unten, für das Wasserbad)Großer Topf (unten, für das Wasserbad)
4

Coat the paper

Coat the blended emulsion on the paper base as usual, as one layer, and let it set and dry in the dark. Thickness and drying: not given.

Materialien für diesen Schritt:

PapierPapier1 as required

Benötigte Werkzeuge:

Flache KeramikschalenFlache Keramikschalen
Lichtdichter KastenLichtdichter Kasten
5

Choose contrast with a filter

Print without a filter or through blue or magenta for hard, line-like contrast; through yellow for half tones; through orange or light red for softer still.

Materialien

3

Benötigte Werkzeuge

7

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...