ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

Creado por

Forge

11. octubre 2026NO
20
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Intermedio
Several days

Instrucciones

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

Materiales para este paso:

Ladrillos de arcilla cocidaLadrillos de arcilla cocida1 as required
PiedrasPiedras1 as required

Herramientas necesarias:

Paleta de albañilPaleta de albañil
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

Materiales para este paso:

Tubo de chimeneaTubo de chimenea1 pieza

Herramientas necesarias:

Paleta de albañilPaleta de albañil
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

Materiales para este paso:

Tobera de fraguaTobera de fragua1 pieza
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

Herramientas necesarias:

Ventilador de fragua de manivelaVentilador de fragua de manivela

Materiales

4

Herramientas requeridas

2

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...