Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Intermedio
A few minutes per link
Instrucciones
1
1
His rules
His rules
Cargando el cuaderno de Jupyter…
2
2
Read Edwinson
Read Edwinson
"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3
3
Cut the stock
Cut the stock
For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).
Materiales para este paso:
Varilla de hierro forjado1 piezaHerramientas necesarias:
Tajadera en caliente
Yunque
Martillo4
4
Bend and scarf
Bend and scarf
Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).
Herramientas necesarias:
Fragua de herrero
Yunque
Martillo
Tenazas de herrero5
5
Weld the links
Weld the links
Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.
Materiales para este paso:
Arena1 piezaHerramientas necesarias:
Fragua de herrero
Yunque
Martillo
Tenazas de herrero6
6
S-hooks for repairs
S-hooks for repairs
Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).
Materiales para este paso:
Varilla de hierro forjado1 piezaHerramientas necesarias:
Fragua de herrero
Yunque
Martillo7
7
Swivel link
Swivel link
Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).
Materiales para este paso:
Varilla de hierro forjado1 piezaHerramientas necesarias:
Fragua de herrero
Yunque
Martillo
Tenazas de herrero8
8
Troubleshooting
Troubleshooting
Chain troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.
Materiales
2- 1 piezaMarcador de posición
- 1 piezaMarcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.


