ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Machete to a Relief Specification
Forge

Creado por

Forge

11. octubre 2026NO
19
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Avanzado
Factory process

Instrucciones

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Materiales para este paso:

Tocho de acero al alto carbonoTocho de acero al alto carbono1 pieza

Herramientas necesarias:

Fragua de herreroFragua de herrero
MartineteMartinete
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Herramientas necesarias:

Fragua de herreroFragua de herrero
Durómetro RockwellDurómetro Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Materiales para este paso:

Listón de madera dura para mangosListón de madera dura para mangos1 pieza
Remaches de aceroRemaches de acero3 piezas
Arandela planaArandela plana3 piezas
4

Check

Check the edge for dents and the hardness near the edge.

Herramientas necesarias:

Durómetro RockwellDurómetro Rockwell

Materiales

4

Herramientas requeridas

3

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...