ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom.
The picture: grosgrain ribbons (Wikimedia Commons).
Intermedio
Two evenings
Instrucciones
1
1
The thread and twine
The thread and twine
Spinning the fine warp thread and the heavier twine used as weft.
2
2
Measure the warp
Measure the warp
For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.
Materiales para este paso:
Hilo de urdimbre de algodón1 as requiredHerramientas necesarias:
Urdidera de pared
Cinta métrica
Regla3
3
Thread the heddle
Thread the heddle
Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.
Herramientas necesarias:
Telar de peine rígido4
4
Weave with a heavy weft
Weave with a heavy weft
Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.
Materiales para este paso:
Cordel de algodón1 as requiredHerramientas necesarias:
Telar de peine rígido
Lanzadera5
5
Keep the edges straight
Keep the edges straight
Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.
Herramientas necesarias:
Regla6
6
Cut off and secure
Cut off and secure
Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.
Herramientas necesarias:
Tijeras de sastre7
7
Troubleshooting
Troubleshooting
Grosgrain troubleshooting.
Flow
Loading...
Materiales
2- 1 as requiredMarcador de posición
- 1 as requiredMarcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.