ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Hard Soap Boiled from Tallow and Soda Lye, Framed and Wire-Cut, Ure 1839
Hard soap is tallow boiled with caustic soda lye; potash would give soft soap. Andrew Ure (1839): run the lye through soda and quicklime, boil the tallow with weak lye, draw the spent lye off and boil again with stronger lye day by day, then ladle the soap into a frame and cut it with a brass wire into bars. Caustic lye burns skin and eyes: goggles and gloves.
The picture: a bar of hard soap.
Intermedio
A week
Instrucciones
1
1
Run the lye
Run the lye
Fit a barrel with a perforated false bottom covered by cloth and a tap beneath, like Ure's vats. Put in a layer of quicklime, then alternate layers of ground soda ash and lime. Pour on water and draw off the clear caustic lye. Make some weak (hydrometer about 1.040) and some strong (up to 1.160).
Materiales para este paso:
Carbonato de sodio (sosa)2 kgHerramientas necesarias:
Cal viva
Barril de madera
Paño (de colar)
Agua
Hidrómetro
Cubo metálico
Gafas de protección química
Guantes de goma2
2
First boils
First boils
Melt the tallow in the cauldron, add weak lye and boil gently about 4 hours, stirring. Test on a knife blade: when the lye runs off the soapy paste at once, it has taken. Let it stand an hour and ladle off the spent lye beneath.
Materiales para este paso:
Sebo5 kgHerramientas necesarias:
Caldero grande de hierro fundido
Leña
Pala de madera
Cuchillo de cocina
Cucharón
Balanza de platillos
Gafas de protección química
Guantes de goma3
3
Stronger lyes
Stronger lyes
Repeat with fresh lye, a little stronger each day, drawing the spent lye off each time, until the paste stays firm on cooling.
Herramientas necesarias:
Caldero grande de hierro fundido
Leña
Pala de madera
Cucharón
Hidrómetro
Gafas de protección química
Guantes de goma4
4
Frame and cut
Frame and cut
Skim the pan and ladle the soap into a wooden frame. After two days take the frame off, cut the block into slabs with a brass wire, then the slabs into bars, and stand them to harden.
Herramientas necesarias:
Cucharón
Molde de jabón
Alambre fino de latón
Cuchillo de cocina
Guantes de goma5
5
Soap from your tallow
Soap from your tallow
Cargando el cuaderno de Jupyter…
Herramientas requeridas
16- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.




