
Alloying Bronze (Cu + Sn) — The Bronze Age Begins
Instrucciones
Prerequisite: Smelting Copper
Prerequisite: Smelting Copper
You need copper ingots — the base metal for bronze alloy.

Blueprint prerrequisito
Smelting Copper from Malachite — The Birth of Metallurgy
Materiales para este paso:
Copper (smelted or purchased)900 gHerramientas necesarias:
Kiln (from Blueprint 02)
Bellows
Crucible tongs
Casting mold
Anvil
Ball peen hammerPrerequisite: Casting Copper Tools
Prerequisite: Casting Copper Tools
You need casting technique from this blueprint to shape bronze.

Blueprint prerrequisito
Casting Copper Tools — Shaping the First Metal
Materiales para este paso:
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitPrerequisite: Extracting Tin
Prerequisite: Extracting Tin
You need tin — the critical alloying element. Tin was the strategic resource of the Bronze Age.

Blueprint prerrequisito
Extracting Tin from Cassiterite — The Missing Ingredient
Materiales para este paso:
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitMetallurgy of Bronze
Metallurgy of Bronze
Why Bronze is Superior
Bronze is a solid solution alloy — tin atoms dissolve into the copper crystal lattice, distorting it and blocking dislocation movement. Result:
| Property | Copper | Bronze (10% Sn) | Improvement |
|---|---|---|---|
| Vickers Hardness | 40-50 | 70-150 | 2-3× harder |
| Tensile Strength | 210 MPa | 300-500 MPa | 2× stronger |
| Melting Point | 1085°C | ~950°C | Easier to melt! |
| Castability | Poor (gassy) | Excellent (fluid) | Complex shapes |
| Corrosion | Forms green patina | Highly resistant | Lasts millennia |
The Ideal Ratio
Ancient smiths converged on ~10% tin, 90% copper through trial and error:
- <8% tin: Too soft, barely better than copper
- 10-12% tin: Optimal hardness, good castability, golden colour
- 15-20% tin: Very hard but brittle — good for bells and mirrors, bad for tools
- >20% tin: Extremely brittle, shatters on impact
Materiales para este paso:
Copper (smelted or purchased)900 g
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitThe Alloying Process
The Alloying Process
Preparation
- Weigh your metals: 900g copper + 100g tin for classic 10% bronze.
- Cut copper into small pieces (1-2cm) for faster melting.
- Tin can be in any form — it melts so fast it dissolves almost instantly.
Melting Sequence (CRITICAL)
- Melt the copper first. Load copper into pre-heated crucible in the kiln. Bring to full liquid (1085°C+).
- Add tin LAST. When copper is fully molten, add tin to the surface. Tin melts instantly (232°C) and dissolves into the copper.
- Stir with a pre-heated dry stick or ceramic rod. Ensure uniform mixing — 10 seconds of stirring is enough.
- NEVER add copper to molten tin — the temperature differential causes violent boiling and spatter.
Signs of Good Bronze
- Surface should be bright and mirror-like when fully liquid
- Colour: golden-yellow (not coppery red = too little tin, not silvery = too much tin)
- Flows smoothly when poured — bronze is more fluid than pure copper
Pour
- Skim slag from surface.
- Pour into pre-heated mold in one continuous stream.
- Bronze has excellent castability — it fills fine details that pure copper cannot.
Materiales para este paso:
Crucible1 pieza
Copper (smelted or purchased)900 g
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kit
Aluminum Bronze C954 (Reference)1 referenciaFinishing and the Innovation Leap
Finishing and the Innovation Leap
Post-Casting
- Allow to cool naturally in the mold.
- Remove from mold, break off sprues.
- Cold-work the edges: bronze work-hardens even more effectively than copper.
- Grind and polish the working edge.
Testing Your Bronze
- Ring test: Strike with a stick — good bronze produces a clear, bell-like ring. Dull thud = bad alloy or porosity.
- Edge test: A bronze axe keeps its edge 3-5× longer than copper.
- Colour: Golden-yellow when polished. Develops green patina over time (same as the Statue of Liberty).
The Civilization Impact
Bronze changed everything:
- Agriculture: Bronze ploughshares broke harder soil → more food → larger populations
- Warfare: Bronze swords and armour dominated for 2,000 years
- Art: Bronze casting enabled the first complex sculptures (lost-wax casting)
- Trade: Tin scarcity created the first long-distance trade networks
But bronze has a fatal flaw: tin scarcity. When the Bronze Age trade networks collapsed (~1200 BCE), civilizations that couldn't get tin were forced to master a harder, more abundant metal — iron. See Blueprint 08: Building a Bloomery & Smelting Iron.
Materiales para este paso:
Lost Wax Casting Kit1 kit
Copper (smelted or purchased)900 g
Tin (smelted or purchased)100 g
Crucible1 pieza
Aluminum Bronze C954 (Reference)1 referenciaMateriales
6- Marcador de posición
- Marcador de posición
- 1 piezaMarcador de posición
- Marcador de posición
- 1 referenciaMarcador de posición
Herramientas requeridas
6- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Materiales de Blueprints conectados
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.