ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Leather Strop: a Beech Paddle Faced with Leather on Both Sides
A strop is a strip of leather that straightens the fine edge of a blade after the stone; with an abrasive such as iron oxide rubbed in, it also polishes a little. Strops hang, sit as blocks, or come as hand-held paddles. Glue leather to both faces of a beech paddle, smooth side out on one face and rough side out on the other, and charge the rough side with red iron oxide.
The picture: our diagram, the paddle from above and in section, with a blade drawn spine first.
Principiante
An afternoon
Instrucciones
1
1
Shape the paddle
Shape the paddle
Saw and plane a beech paddle about 40 × 6 × 1.5 cm with a 10 cm handle (our size), and round the handle with the spokeshave.
Materiales para este paso:
Madera de haya1 piezaHerramientas necesarias:
Serrucho
Cepillo de carpintero
Cuchilla de dos manos2
2
Cut the leather
Cut the leather
Cut two strips of leather to the blade area of the paddle.
Materiales para este paso:
Cuero curtido al vegetal1 piezaHerramientas necesarias:
Cúter
Regla3
3
Glue them on
Glue them on
Glue one strip smooth (grain) side out on one face and the other rough (flesh) side out on the other face with hot hide glue, and clamp flat until set.
Materiales para este paso:
Cola de piel animal0.05 kgHerramientas necesarias:
Gato de tornillo en C
Olla grande (inferior, para baño María)
Vaso de precipitados de vidrio4
4
Charge the rough side
Charge the rough side
Rub red iron oxide (red ochre) into the rough side. Strop by drawing the blade spine first, edge trailing (our practice), with light, even strokes on each side.
Materiales para este paso:
Pigmento de ocre rojo0.01 kgHerramientas necesarias:
Cúter5
5
Leather for the paddle
Leather for the paddle
Cargando el cuaderno de Jupyter…
Materiales
4- 1 piezaMarcador de posición
- 1 piezaMarcador de posición
- 0.05 kgMarcador de posición
- 0.01 kgMarcador de posición
Herramientas requeridas
8- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

