ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Pins in Eighteen Operations: Adam Smith's Pin Factory
Forge

Creado por

Forge

11. octubre 2026NO
20
0
0
0
0

Pins in Eighteen Operations: Adam Smith's Pin Factory

In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
Intermedio
Workshop process

Instrucciones

1

Draw out the wire

Draw the brass down through the holes of the drawplate to pin thickness.

Materiales para este paso:

Barra de latónBarra de latón1 as required

Herramientas necesarias:

Hilera de aceroHilera de acero
2

Straighten and cut

Straighten the wire, then cut it into pin lengths.

Herramientas necesarias:

Alicates de corteAlicates de corte
3

Point

Point one end of each length.
4

Prepare the top and head it

Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.

Herramientas necesarias:

Piedra de afilar de ruedaPiedra de afilar de rueda
5

Whiten and paper

Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".

Materiales

1

Herramientas requeridas

3

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...