ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Ripstop Nylon: Doubled Threads Woven in Every 5 to 8 mm, Both Ways
Tex

Creado por

Tex

18. octubre 2026FO
6
0
0
0
0

Ripstop Nylon: Doubled Threads Woven in Every 5 to 8 mm, Both Ways

Ripstop is cloth with a grid of stronger threads woven in every 5 to 8 mm, both ways (Wikipedia). A small tear runs only as far as the next line of the grid. In the Army's parachute nylon (US 3,032,072, 1962) the rip-stop threads go in as doubled pairs, warp and weft, with ordinary threads between. The picture: ripstop fabric, the grid of doubled threads showing (Wikimedia Commons).
Intermedio
Days

Instrucciones

1

Wind the warp with doubled pairs

Wind a nylon warp. Every 5 to 8 mm, wind a pair of threads instead of one: these doubled pairs are the warp rip-stops.

Materiales para este paso:

Fibra de nailonFibra de nailon300 g

Herramientas necesarias:

Urdidera de paredUrdidera de pared
ReglaRegla
2

Dress the loom

Thread the warp on the loom, each doubled pair kept together as one rip-stop.

Herramientas necesarias:

Telar de peine rígidoTelar de peine rígido
3

Weave, doubling the weft too

Weave with nylon weft. Every 5 to 8 mm, lay a doubled pick: the weft rip-stops cross the warp ones in a grid.

Herramientas necesarias:

Telar de peine rígidoTelar de peine rígido
LanzaderaLanzadera
ReglaRegla
4

Take it off and test a tear

Cut the cloth off the loom. Nick a scrap and pull: the tear should stop at the next line of the grid.

Herramientas necesarias:

Tijeras de sastreTijeras de sastre

Materiales

1

Herramientas requeridas

5

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...