ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Sodium Bicarbonate: Soda Crystals Exposed to Carbonic Acid in Chambers (the Old Process)
Before the ammonia-soda works, baking soda was made by simply letting carbonic acid gas soak into soda crystals, as Thorpe's Dictionary (1913) describes. The crystals stand in layers on a lath false bottom; the gas comes in below, nine of the crystals' ten molecules of water drain away as mother liquor, carrying the impurities with it, and after 6 to 9 days the crystals have turned into loose, damp bicarbonate in their own shape. It is dried at no more than 45 °C.
The picture: our diagram.
Principiante
3 weeks
Instrucciones
1
1
Stack soda crystals on the lath bottom
Stack soda crystals on the lath bottom
Put ordinary soda crystals (yellow or inferior ones do as well) in regular layers on a false bottom of laths in a closed chamber (preferably iron), leaving space below for the drainage.
Materiales para este paso:
Cristales de sosa1 as requiredHerramientas necesarias:
Cámara de gaseado con falso fondo de listones
Guantes de goma2
2
Pass in carbonic acid for 6 to 9 days
Pass in carbonic acid for 6 to 9 days
Lead carbonic acid gas in below the false bottom; it is usually made from calcium carbonate and hydrochloric acid (ours: whiting in a gas generator). The mother liquor drains off through a U-tube in the chamber bottom. The process is finished when this flow stops, generally in 6 to 9 days.
Materiales para este paso:
Carbonato de calcio (blanco de España)1 as required
Ácido clorhídrico1 as requiredHerramientas necesarias:
Gasógeno
Cámara de gaseado con falso fondo de listones
Gafas de protección química
Guantes de goma3
3
Dry at no more than 45 °C
Dry at no more than 45 °C
Open the chamber: the bicarbonate keeps the shape of the crystals but is a loose, very damp powder. Dry it in a stove at no more than 45 °C; this generally takes 8 to 10 days. Ours: a drying oven.
Herramientas necesarias:
Horno de secado
Termómetro de laboratorioMateriales
3- 1 as requiredMarcador de posición
- 1 as requiredMarcador de posición
- 1 as requiredMarcador de posición
Herramientas requeridas
6- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.


