ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Spring Steel Strip and Wire, Hardened and Tempered
Forge

Creado por

Forge

11. octubre 2026NO
40
0
0
0
0

Spring Steel Strip and Wire, Hardened and Tempered

A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue. It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
Avanzado
A day

Instrucciones

1

Forge strip

Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.

Materiales para este paso:

Acero al crisolAcero al crisol1 kg
Carbón vegetalCarbón vegetal10 kg

Herramientas necesarias:

Fragua de herreroFragua de herrero
YunqueYunque
Martillo de herreroMartillo de herrero
Aplanador de herreroAplanador de herrero
Tenazas de herreroTenazas de herrero
Delantal de cueroDelantal de cuero
Guantes de soldadorGuantes de soldador
Gafas de seguridadGafas de seguridad
2

Anneal

Heat to a dull red and bury it in dry wood ash to cool slowly overnight.

Materiales para este paso:

Ceniza de madera duraCeniza de madera dura2 kg

Herramientas necesarias:

Cubo metálicoCubo metálico
3

Draw wire

For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.

Materiales para este paso:

Cera de abejaCera de abeja10 g

Herramientas necesarias:

Hilera de aceroHilera de acero
Tenazas de estirarTenazas de estirar
Tornillo de bancoTornillo de banco
4

Harden

Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.

Materiales para este paso:

Aceite de colzaAceite de colza5 litros

Herramientas necesarias:

Fragua de herreroFragua de herrero
ImánImán
Cubo metálico con tapaCubo metálico con tapa
Tenazas de herreroTenazas de herrero
Guantes de soldadorGuantes de soldador
5

Clean bright

Sand a stripe bright on the hardened steel so you can see the temper colours.

Herramientas necesarias:

Hoja de papel de lijaHoja de papel de lija
6

Temper to blue

Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.

Herramientas necesarias:

Soplete de propanoSoplete de propano
Ladrillo refractarioLadrillo refractario
Tenazas de herreroTenazas de herrero
7

Test

Clamp one end in the vise and bend the free end a little: it must spring back straight.

Herramientas necesarias:

Tornillo de bancoTornillo de banco
Calibre digital de 6 pulgadasCalibre digital de 6 pulgadas
8

Troubleshooting

Spring tempering troubleshooting.

Flow

Loading...

Materiales

5

Herramientas requeridas

18

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...