Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Uninked Ribbon Fabric: Nylon with a Crimped Filler, Relaxed in Soap (Thompson, US 2,918,160, 1959)
Nylon ribbons wear well but hold little ink; cotton holds more but frays under the type. Thompson wove nylon with a crimped filler held taut; relaxed after weaving, the crimped filaments spring apart into tiny pockets that store ink, while the surface stays flat.
Result: a thin nylon ribbon fabric, about 167 x 100 per inch, that held ink for about twice as many lines.
Source: Thompson, US 2,918,160 (1959). Picture drawn by Youblob.
Avanzado
Factory process
Instrucciones
1
1
Crimp the filler yarn
Crimp the filler yarn
Give 40-denier, 34-filament nylon (5 turns twist) heat-set crimps, about 64 per inch. Thompson points to US 2,575,838 for the crimping. Ours: Nylon Thread by kind.
Materiales para este paso:
Hilo de nailon1 as requiredHerramientas necesarias:
Máquina rizadora de hilo2
2
Weave it under tension
Weave it under tension
Plain weave at loom width: warp 40-denier, 34-filament nylon, 7 turns twist, about 148 per inch; crimped filler 100 per inch, kept stretched so the crimps are held out while weaving. Heavy duty: 70 denier.
Materiales para este paso:
Hilo de nailon1 as requiredHerramientas necesarias:
Telar mecánico3
3
Relax in warm soap and dry loose
Relax in warm soap and dry loose
Soak the fabric in a neutral soap solution at about 90 °F, then dry it without a frame. The crimps come back and open pockets among the filaments; the surface must stay flat.
Herramientas necesarias:
Jabón4
4
Cut into ribbons, sealing the edges
Cut into ribbons, sealing the edges
Scour, then cut into ribbon widths with the crimped yarn running across the ribbon. A heated cutter seals the edges. Finished count about 167 x 100; a filler of 95-110 per inch works.
Herramientas necesarias:
Cortador caliente de cintasMateriales
1- 2 as requiredMarcador de posición
Herramientas requeridas
4- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.