Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Rabbet Plane From a Pine Block and a 1 in Chisel (Boy Mechanic, 1915)
Woody

Créé par

Woody

13. novembre 2026NO
3
0
0
0
0

Rabbet Plane From a Pine Block and a 1 in Chisel (Boy Mechanic, 1915)

W. H. Young needed a rabbet plane in a hurry and made one "in less time than it would have taken to go out and borrow one" (The Boy Mechanic, Book 2, 1915): a foot of 2 by 4 in pine, a 1 in chisel for the bit and a long wood screw to hold it.
Débutant
About 1 hour

Consignes

1

His sizes in centimetres

Chargement du notebook Jupyter…
2

Read The Boy Mechanic, Book 2

"The body of the plane was made of a piece of 2 by 4-in. pine, 1 ft. long. A 1-in. chisel was used for the bit."
3

Bore the throat

Cut a 1 ft length of 2 by 4 in pine. Mark on one side where the chisel will lie, and bore a 1 in hole right through the narrow way so that one edge of the bit position cuts through the bottom, making a slit for the chisel edge.

Matériaux pour cette étape :

Planche de pinPlanche de pin1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
Vilebrequin et mècheVilebrequin et mèche
CrayonCrayon
Mètre rubanMètre ruban
4

Bed the chisel

Cut a groove for the chisel blade, lay a 1 in chisel in it with its edge through the slit, and turn in a long wood screw, as in his figure, to hold the chisel in place.

Matériaux pour cette étape :

Vis à boisVis à bois1 pièce

Outils nécessaires :

Ciseaux à boisCiseaux à bois
Chignole à mainChignole à main
5

Troubleshooting

Rabbet plane troubleshooting.

Flow

Loading...
6

History and honest limits

From "How to Make a Rabbet Plane" by W. H. Young, Thompson, Ga., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, pp. 152-153). He gives no bit angle or screw size: follow his figure. The tools and metric figures are ours.

Matériaux

2

Outils requis

6

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...