Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)
Woody

Créé par

Woody

13. novembre 2026NO
8
0
0
0
0

Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)

C. C. Fraser's hurdle from The Boy Mechanic, Book 2 (1915): a 36 by 18 in swing hung on long nails slightly off centre between two standards joined by a reach. It turns at the slightest touch of the jumper's foot and rights itself again.
Débutant
About 2 hours

Consignes

1

His cutting list in centimetres

Chargement du notebook Jupyter…
2

Read The Boy Mechanic, Book 2

"The hurdle consists of two standards, a reach, and a swing."
3

Make the swing

Nail four pieces about 7/8 in thick and 1-1/2 in wide into a rectangle: two 36 in long and two 18 in long.

Matériaux pour cette étape :

Planche de pinPlanche de pin1 pièce
ClousClous1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
Mètre rubanMètre ruban
CrayonCrayon
4

Make the standards and reach

Make each standard of three pieces 7/8 in thick, 3 in wide and 18 in long, nailed firmly together as in his figure, and join their bases with a reach of the same stuff, 36 in long.

Matériaux pour cette étape :

Planche de pinPlanche de pin1 pièce
ClousClous1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
Mètre rubanMètre ruban
5

Hang the swing

Bore a hole in each standard large enough for a long nail to turn freely but too small for its head to pass, and hang the swing on the nails at its ends, slightly off centre, so it swings at a touch and rights itself.

Matériaux pour cette étape :

ClousClous1 pièce

Outils nécessaires :

Chignole à mainChignole à main
MarteauMarteau
6

Troubleshooting

Hurdle troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Hurdle" by C. C. Fraser, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 145). How far off centre the pivots go is not given. The tools and metric figures are ours.

Matériaux

2

Outils requis

5
  • Espace réservé
  • Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • Espace réservé

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...