Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
Woody

Créé par

Woody

13. novembre 2026NO
6
0
0
0
0

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)

H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
Débutant
About 3 hours

Consignes

1

His list in centimetres

Chargement du notebook Jupyter…
2

Read The Boy Mechanic, Book 2

The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3

Make the two bobs

Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.

Matériaux pour cette étape :

Douelle de tonneauDouelle de tonneau4 pièces
Planche de pinPlanche de pin1 pièce
Planche de bois durPlanche de bois dur1 pièce
ClousClous1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
CrayonCrayon
Mètre rubanMètre ruban
4

Fit the bobs to the board

Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.

Matériaux pour cette étape :

Planche de pinPlanche de pin1 pièce
Planche de bois durPlanche de bois dur1 pièce
Boulon de carrosserieBoulon de carrosserie1 pièce
Rondelle plateRondelle plate2 pièces
ClousClous1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
Scie égoïneScie égoïne
MarteauMarteau
5

Fit the steering rope

Fasten a rope to the knees of the front runners; it steers the sled.

Matériaux pour cette étape :

Corde de cotonCorde de coton1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
6

Troubleshooting

Bobsled troubleshooting.

Flow

Loading...
7

History and honest limits

From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.

Matériaux

7

Outils requis

5
  • Espace réservé
  • Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • Espace réservé

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...