Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
Woody

Créé par

Woody

13. novembre 2026NO
8
0
0
0
0

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)

F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
Débutant
About 3 hours

Consignes

1

His sizes in centimetres

Chargement du notebook Jupyter…
2

Read The Boy Mechanic, Book 2

"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3

Cut the runners

From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
Scie à chantournerScie à chantourner
RabotRabot
CrayonCrayon
Mètre rubanMètre ruban
4

Assemble each skate

Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
ClousClous1 pièce
Boulon de carrosserieBoulon de carrosserie2 pièces

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
Chignole à mainChignole à main
5

Fit the corner pieces and straps

Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
ClousClous1 pièce
Lanière de cuirLanière de cuir2 pièces

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
Chignole à mainChignole à main
6

Troubleshooting

Wooden skate troubleshooting.

Flow

Loading...
7

History and honest limits

From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.

Matériaux

4

Outils requis

7
  • Espace réservé
  • Espace réservé
  • Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • 1 vendor sell this, none ship to you yet
    Espace réservé
  • Espace réservé
  • Espace réservé

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...