Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)
Forge

Créé par

Forge

13. novembre 2026NO
3
0
0
0
0

One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)

Samuel Buchsbaum of Chicago received US 1,444,023, dated 6 February 1923, for a cuff button made in one piece. A flat blank has two oval faces joined at their edges by a tongue. The tongue is bent into a V-shaped shank with a curved middle, and the faces lean in towards each other. Pockets between the shank and the faces hold the two ends of the cuff together. There is nothing to solder and nothing to come apart. We cut it from brass sheet with a jeweller's saw, using a 1:1 template. All sizes are ours.
Débutant
About 2 hours

Consignes

1

Where the cuff is gripped

Chargement du notebook Jupyter…
2

Read US 1,444,023

"It is a purpose of the present invention to form a cuff button wherein the face members and shank portion are integral, said members being all stamped from a single sheet of material."
3

Print the template

Three blanks at 1:1 with the bend lines, and a side view of the bent button. print at 100 % (check the 50 mm bar).
Fichier de designPDFCC0 - Free
4

Cut the blank

Cut a blank out of the paper and lay it on 0.8 mm brass sheet. Scribe round it. Saw just outside the line with a jeweller's saw, then file to the line, keeping the tongue an even 4 mm wide where it meets each face.

Matériaux pour cette étape :

Feuille de laitonFeuille de laiton1 pièce

Outils nécessaires :

Pointe à tracerPointe à tracer
Bocfil de bijoutierBocfil de bijoutier
Jeu de limes aiguillesJeu de limes aiguilles
Étau d'établiÉtau d'établi
5

Smooth the edges

Round every edge with the needle files and sandpaper so nothing can catch the cuff or the skin. Do the faces' fronts now: they are hard to reach once bent.

Outils nécessaires :

Jeu de limes aiguillesJeu de limes aiguilles
Papier abrasifPapier abrasif
6

Bend the shank

Hold the middle of the tongue round a 3 mm rod, or in the round-nose pliers, and bend both halves up into a V about 60 degrees apart (ours). The middle stays curved, as his part 16.

Outils nécessaires :

Pince à becs rondsPince à becs ronds
Rond en acier douxRond en acier doux
7

Bend the faces

Grip each leg close to its face with the flat-nose pliers and fold the face back down outside the leg, so it hangs beside the leg and leans in a little, as in his Fig. 1. The narrow gap between leg and face is the pocket for the cuff. Check both faces sit level with each other.

Outils nécessaires :

Pince platePince plate
8

Polish

Polish the faces with polishing compound on a soft cloth.

Outils nécessaires :

Pâte à polirPâte à polir
9

Fit it to the cuff

Turn the button edgewise and pass one face through both buttonholes, turning it as it goes, as he describes. Each cuff end should sit in a pocket between a leg and its face, and the ends stay together. If it is too tight, open the faces out a little; if loose, press them in.

Outils nécessaires :

Pince platePince plate
10

Troubleshooting

One-piece cuff button troubleshooting.

Flow

Loading...
11

History and honest limits

**Samuel Buchsbaum** of Chicago, US 1,444,023, dated 6 February 1923, filed 22 August 1921. He claimed "a blank for cuff buttons comprising a sheet metal member having enlarged end members and a connecting tongue joining the adjacent edge portions of said end members". His were stamped; ours is sawn and filed. He also shows a form with square ends and a reinforced tongue (Figs. 5-6), not built here. He gives no sizes or metal: the brass, the 18 x 12 mm faces, the 4 x 18 mm tongue and the angles are ours.

Matériaux

1

Outils requis

9

Fichiers de conception

1

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...