Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
Avancé
A day at the forge
Consignes
1
1
Read Edwinson
Read Edwinson
"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2
2
Form the eye
Form the eye
Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).
Matériaux pour cette étape :
Barre de fer forgé1 pièceOutils nécessaires :
Forge de forgeron
Enclume
Marteau
Pinces de forgeron
Mandrin à élargir3
3
Draw the ends
Draw the ends
Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.
Outils nécessaires :
Forge de forgeron
Enclume
Marteau
Masse4
4
Steel the points
Steel the points
Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.
Matériaux pour cette étape :
Acier au creuset1 pièce
Borax en poudre1 pièceOutils nécessaires :
Forge de forgeron
Tranche à chaud
Masse
Enclume
Pinces de forgeron5
5
Steel the axe or hammer end
Steel the axe or hammer end
Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.
Matériaux pour cette étape :
Plaque d'acier corroyé1 pièce
Borax en poudre1 pièceOutils nécessaires :
Forge de forgeron
Enclume
Marteau
Pinces de forgeron6
6
Harden and temper
Harden and temper
Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.
Outils nécessaires :
Forge de forgeron
Baquet de trempe7
7
Handle it (ours)
Handle it (ours)
He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.
Matériaux pour cette étape :
Billette de frêne1 pièce
Coins en bois1 pièceOutils nécessaires :
Plane
Marteau8
8
Troubleshooting
Troubleshooting
Pick troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.
Matériaux
6- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.



