Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Stirrup Leathers: Middlings Straps Stitched to Stirrup Buckles, Creased on the Flesh Side (Hasluck, Saddlery, 1904)
Stirrup leathers hang the stirrup irons from a riding saddle and let the rider set their length. These are the stirrup leathers from Paul N. Hasluck's Saddlery (1904): a strap of stirrup middlings 1-1/4 in wide and 4 ft to 4 ft 6 in long, stitched to a stirrup leather buckle and creased on the flesh side. A saddle takes a pair.
Débutant
About 3 hours
Consignes
1
1
His sizes in centimetres
His sizes in centimetres
Chargement du notebook Jupyter…
2
2
Read Saddlery, ch. V
Read Saddlery, ch. V
"Stirrup leathers (Fig. 15) must be made from stirrup middlings, and with stirrup leather buckles; the width may be 1-1/8 in. to 1-1/2 in., but 1-1/4 in. is most common, whilst the length varies from 4 ft. to 4 ft. 6 in."
3
3
Cut the straps
Cut the straps
Cut two straps from stirrup middlings, 1-1/4 in wide (1-1/8 in to 1-1/2 in) and 4 ft to 4 ft 6 in long, to suit the rider. There is no need to cut holes for the buckle tongues at the buckle end, as the tongues do not go through the leather there.
Matériaux pour cette étape :
Milieux pour étrivières1 pièceOutils nécessaires :
Couteau à cuir
Mètre ruban4
4
Stitch on the buckles
Stitch on the buckles
Bend the strong end of each strap over for about 2 in and stitch it firmly to the bottom of the buckle. Narrow the buckling end a little and nip a little from each corner.
Matériaux pour cette étape :
Boucle d'étrivière2 pièces
Fil de lin1 pièce
Cire d'abeille1 pièceOutils nécessaires :
Couteau à cuir
Alêne
Deux aiguilles de sellier
Pince de sellier5
5
Finish the edges and crease
Finish the edges and crease
Stain the edges and polish them well. Crease double and heavily with a hot screw crease on the flesh side, instead of the grain side as with other straps.
Matériaux pour cette étape :
Teinture pour cuir1 pièceOutils nécessaires :
Abat-carre
Lissoir à arêtes de cuir
Plioir
Chalumeau à propane6
6
Turn the chape and punch
Turn the chape and punch
Turn the chape at the buckle the reverse way, and make about eight holes in each strap.
Outils nécessaires :
Emporte-pièce pour cuir
Mètre ruban7
7
Troubleshooting
Troubleshooting
Stirrup leather troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, stirrup leathers, pp. 48-49, Fig. 15 on p. 47; every fraction was read on the scan. He says about eight holes; his Fig. 15 shows seven. The ladies' single stirrup strap is not made here. Making them as a pair, the thread, tools and metric figures are ours.
Matériaux
5- 1 pièceEspace réservé
- 2 piècesEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
Outils requis
10- Espace réservé
- 1 vendor sell this, none ship to you yetEspace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Ce plan fabrique
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.


