Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)
Tex

Créé par

Tex

13. novembre 2026FO
2
0
0
0
0

Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)

A martingale runs from the girth up between the horse's forelegs and stops it throwing its head too high. This is the martingale from Paul N. Hasluck's Saddlery (1904), as in his Fig. 11: a neck strap about 4 ft 6 in long, and a breast strap slit at the top into two branches, each ending in a ring for the reins. Every size is his; he does not give the size of the rings.
Intermédiaire
About 1 day

Consignes

1

His sizes in centimetres

Chargement du notebook Jupyter…
2

Read Saddlery, ch. V

"Martingales (Fig. 11) are made with straps round the neck, either flat or round, and with or without a buckle; the total length is about 4 ft. 6 in., and the flat strap is 3/4 in. wide."
3

Make the neck strap

Cut the neck strap about 4 ft 6 in long and 3/4 in wide. With a buckle: place a piece of leather about 1 ft 3 in from the buckle for the breast strap and stitch it at both ends, so it makes an opening. Round the rest of the neck strap, leaving about 1 ft flat for a 3/4 in buckle. Without a buckle, make the opening by simply overlapping the ends, leaving enough space between the two splices for the breast strap.

Matériaux pour cette étape :

Cuir de harnaisCuir de harnais1 pièce
CordeletteCordelette1 pièce
Boucle en fer à ardillonBoucle en fer à ardillon1 pièce
Fil de linFil de lin1 pièce
Cire d'abeilleCire d'abeille1 pièce

Outils nécessaires :

Couteau à cuirCouteau à cuir
Planche à rainuresPlanche à rainures
Abat-carreAbat-carre
Lissoir à arêtes de cuirLissoir à arêtes de cuir
PlioirPlioir
Chalumeau à propaneChalumeau à propane
AlêneAlêne
Deux aiguilles de sellierDeux aiguilles de sellier
Pince de sellierPince de sellier
Mètre rubanMètre ruban
4

Cut and slit the breast strap

Cut the breast strap 1-1/4 in wide and 4 ft long and slit it for 1 ft 1 in. It may be flat or round; a round one must be cut wider to begin with, say 1-5/8 in, and then slit in half.

Matériaux pour cette étape :

Cuir de harnaisCuir de harnais1 pièce

Outils nécessaires :

Couteau à cuirCouteau à cuir
Mètre rubanMètre ruban
5

Make the girth loop

For a flat strap, narrow it at the unslit end for 1 ft 6 in from the end. Fix a 1 in buckle there the reverse way and buckle the strap back on itself to form a loop for the girth. Fit this buckle before the rings.

Matériaux pour cette étape :

Boucle en fer à ardillonBoucle en fer à ardillon1 pièce
Fil de linFil de lin1 pièce
Cire d'abeilleCire d'abeille1 pièce

Outils nécessaires :

Couteau à cuirCouteau à cuir
Abat-carreAbat-carre
Lissoir à arêtes de cuirLissoir à arêtes de cuir
PlioirPlioir
Chalumeau à propaneChalumeau à propane
AlêneAlêne
Deux aiguilles de sellierDeux aiguilles de sellier
Emporte-pièce pour cuirEmporte-pièce pour cuir
6

Put on the rings and finish

Put a ring on the end of each slit branch, as in Fig. 11; he does not give the ring size. Then run the buckle end of the breast strap through the opening in the neck strap, and the martingale is complete.

Matériaux pour cette étape :

Anneau de harnaisAnneau de harnais2 pièces
Fil de linFil de lin1 pièce
Cire d'abeilleCire d'abeille1 pièce

Outils nécessaires :

Couteau à cuirCouteau à cuir
AlêneAlêne
Deux aiguilles de sellierDeux aiguilles de sellier
Pince de sellierPince de sellier
7

Troubleshooting

Martingale troubleshooting.

Flow

Loading...
8

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, martingales, pp. 45-47, Fig. 11 on p. 43; every fraction was read on the scan. He names the rings but gives no size for them, and does not say how they are fixed to the branches: follow Fig. 11. The combined martingale and breastplate on p. 45 is not made here. The thread, tools and metric figures are ours.

Matériaux

6

Outils requis

11

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...