Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)
How the common English screw auger was made, from Holtzapffel's Turning and Mechanical Manipulation: a parallel steel blade twisted red-hot, a worm at the point to pull it into the wood, two lips sharpened to cut, and the shaft end forged into an eye for a tightly driven cross handle.
Avancé
A day at the forge
Consignes
1
1
Twist count
Twist count
Chargement du notebook Jupyter…
2
2
Read Holtzapffel
Read Holtzapffel
"The ordinary screw auger ... is forged as a parallel blade of steel ... it is twisted red-hot."
3
3
Forge the blade
Forge the blade
Draw a steel bar out into a flat, parallel blade, leaving a round end for the shaft. Width, thickness and length are ours: make the blade as wide as the hole you want.
Matériaux pour cette étape :
Barre d'acier à outils1 pièceOutils nécessaires :
Forge de forgeron
Enclume
Marteau
Pinces de forgeron
Dégorgeoir (fuller)4
4
Twist it red-hot
Twist it red-hot
Heat the blade to red, grip one end in the vice and twist the other with a wrench into an even double spiral. Twist in short heats and keep the pitch even.
Outils nécessaires :
Forge de forgeron
Étau d'établi
Tourne-à-gauche
Pinces de forgeron5
5
Form the worm and lips
Form the worm and lips
File the point into a worm (a small tapered screw, as on a gimlet) that pulls the auger into the work. Shape and sharpen the two corners, or lips, to cut at the very ends and a little up the sides.
Outils nécessaires :
Étau d'établi
Limes (lime à main)6
6
Forge the eye
Forge the eye
Forge the top of the shaft into a ring or eye.
Outils nécessaires :
Forge de forgeron
Enclume
Marteau
Pinces de forgeron7
7
Harden and temper (ours)
Harden and temper (ours)
He gives no hardening. Ours: harden the cutting end and temper it as for other wood-cutting edge tools, then hone the lips.
Outils nécessaires :
Forge de forgeron
Baquet de trempe
Pierre à aiguiser8
8
Fit the cross handle
Fit the cross handle
Shape a hardwood bar and drive it tightly through the eye as a transverse handle.
Matériaux pour cette étape :
Planche de bois dur1 pièceOutils nécessaires :
Plane
Marteau9
9
Troubleshooting
Troubleshooting
Screw auger troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From Charles Holtzapffel, **Turning and Mechanical Manipulation**, vol. II (1846), pp. 540, 543 and 545-546 (checked on the archive.org scan turningmechanica02holtuoft). He also describes the single-lip auger: a half-round bar coiled into an open spiral with the flat side outwards, the end shaped like a shell auger. He gives no sizes or heat treatment: those, the tools and the handle wood are ours.
Matériaux
2- 1 pièceEspace réservé
- 1 pièceEspace réservé
Outils requis
11- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.



