Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Instant-Read Thermometer: Digital, with a Stainless Probe That Pivots on the Case (Cook, US 5,018,875, 1991)
Penny

Créé par

Penny

3. novembre 2026DK
11
0
0
0
0

Instant-Read Thermometer: Digital, with a Stainless Probe That Pivots on the Case (Cook, US 5,018,875, 1991)

A pocket digital thermometer. A thin stainless steel probe with a thermistor in its tip pivots on a small, flat-sided case, so you can push the probe into food and turn the display to face you. A button cell runs a chip and a liquid crystal display, and a push button updates the reading at once. The angled case will not roll off a table. Result: a thin-probe digital thermometer for food and air. Source: T. A. Cook (PSG Industries), US 5,018,875 (1991). Unknown: the circuit, the range, the case size. Picture: the patent drawing.
Intermédiaire
Unknown

Consignes

1

Make the probe

Cut a type 304 stainless steel tube about 0.166 in (4.0 mm) across and 5 in (120 mm) long, and close one end. Set a thermistor inside the closed tip and run its two wires up the tube. Aluminium or titanium would also serve.

Matériaux pour cette étape :

Tube en acier inoxydableTube en acier inoxydable1 probe
Kit de thermistances CTNKit de thermistances CTN1 thermistor
Fil de cuivreFil de cuivre1 interconnecting wires

Outils nécessaires :

Scie à métauxScie à métaux
Fer à souderFer à souder
2

Mould the pivot boss and case

Mould from ABS a cylindrical pivot boss with a recess for the probe's open end and a channel right through it for the wires. Mould the case in an upper and a lower half that snap together, wider at the display end and tapering to the probe end so it cannot roll, with two projecting supports at the probe end, each with a pivot hole. Not given: the sizes.

Matériaux pour cette étape :

Granulés d'ABSGranulés d'ABS1 boss and case

Outils nécessaires :

Presse à injecterPresse à injecter
Dimensions inconnuesDimensions inconnues
3

Fit the electronics and assemble

In the case, fit an integrated circuit that turns the thermistor's resistance into a reading on a liquid crystal display at the wide end, with a push button beside it that updates the reading at once. Add a compartment for a 1.5 V button cell (Eveready E675, IEC R07) under a cover that locks with a quarter turn. Push the probe into the boss, lead the wires through the channel to the circuit, and clamp the boss ends in the pivot holes as the halves snap together; friction holds whatever angle you set. In use, push the probe in, turn the display to face you and press the button. Not given: the circuit (the patent points to US 4,536,851).

Matériaux pour cette étape :

Circuit impriméCircuit imprimé1 pièce
Circuit intégréCircuit intégré1 pièce
Afficheur LCD à segmentsAfficheur LCD à segments1 pièce
Bouton-poussoirBouton-poussoir1 pièce
Pile bouton 1,5 VPile bouton 1,5 V1 pièce
Fil de soudureFil de soudure1 as needed

Outils nécessaires :

Fer à souderFer à souder

Matériaux

10

Outils requis

4

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...