Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)
Woody

Créé par

Woody

13. novembre 2026NO
5
0
0
0
0

Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)

Roland King of Newport, Rhode Island, received US 769,350, dated 6 September 1904, for a pipe rack that holds each tobacco pipe bowl-down in an egg-shaped recess edged with soft leather, its stem resting in a notch of a raised rail behind, so moisture drains from the stem into the bowl. A classic gift for Father's Day. We make it from hardwood with calf leather edging. All sizes are ours.
Débutant
About 3 hours

Consignes

1

Spacing

Chargement du notebook Jupyter…
2

Read US 769,350

"It will be seen that my pipe-rack is of exceedingly simple construction and one which insures the pipes being supported thereon in the correct position to drain moisture from the stem into the bowl."
3

Cut and hollow the base

Cut the base A from a hardwood board to the notebook's length. Mark the egg-shaped recesses B along the front, bore each out with the brace and bit and shape it to an egg with a gouge, so a pipe bowl sits in it.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce

Outils nécessaires :

Mètre rubanMètre ruban
CrayonCrayon
Scie égoïneScie égoïne
Vilebrequin et mècheVilebrequin et mèche
GougeGouge
Papier abrasifPapier abrasif
4

Edge the recesses with leather

Cut thin strips of soft calf leather and glue them round the edge of each recess with contact cement, his cushion edging C, so the bowls are not nicked or scratched.

Matériaux pour cette étape :

Cuir de veauCuir de veau1 pièce
Colle contactColle contact1 pièce

Outils nécessaires :

Cutter de précisionCutter de précision
5

Make the stem rail

Cut the rack E from the same board and cut a notch e in its front edge opposite each recess, wide enough for a pipe stem, rounded and sanded smooth.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
Scie à chantournerScie à chantourner
Râpe à boisRâpe à bois
Papier abrasifPapier abrasif
6

Raise the rail

Drill the back edge of the base and the underside of the rail and glue in a row of dowel pins D, holding the rail above the rear edge of the base at the notebook's height.

Matériaux pour cette étape :

Goujons de bois durGoujons de bois dur1 pièce
Colle à boisColle à bois1 pièce

Outils nécessaires :

Chignole à mainChignole à main
Scie égoïneScie égoïne
7

Use it

Set each pipe with its bowl in a recess and its stem in the notch above: the stem slopes down toward the bowl.
8

Troubleshooting

Pipe rack troubleshooting.

Flow

Loading...
9

History and honest limits

**Roland King** of Newport, Rhode Island, US 769,350, dated 6 September 1904, filed 12 May 1903. He claimed "a pipe-rack having a base A, in which are provided one or more egg-shaped recesses ... to receive the bowls of pipes, in combination with a stem-supporting rack E, supported above one edge of the base and provided with notches to hold the pipe-stems". He gives no sizes: the hardwood, calf, all sizes and the number of pipes are ours.

Matériaux

5

Outils requis

10

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...