Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Dog Kennel Whose Top Tilts Back on Lift-Off Hinges to Air and Clean It (Minion, 1909)
John S. Minion of Newark received US 920,975, dated 11 May 1909, for a kennel in two parts. The top half, with the roof, sits on the bottom half and hinges at the back on slotted plates and studs, so it can be tilted back to let the sun in and clean the floor, or lifted right off. A swinging arm drops down by itself to hold it open.
We build it from pine. All sizes are ours.
Intermédiaire
About 1 day
Consignes
1
1
Size for the dog
Size for the dog
Chargement du notebook Jupyter…
2
2
Read US 920,975
Read US 920,975
"The upper portion can be tilted back as shown in Fig. 1 so as to permit the cleaning of the lower portion, and also allow sunlight to penetrate therein over its whole surface, which makes a sanitary structure."
3
3
Build the lower portion
Build the lower portion
Build an open box of pine boards with upright sides and a floor, his portion 10, raised on two strips 12 so air passes under it. Cut the entrance 11 in the front.
Matériaux pour cette étape :
Planche de pin1 pièce
Clous galvanisés1 pièceOutils nécessaires :
Mètre ruban
Scie égoïne
Scie à chantourner
Marteau à panne fendue4
4
Build the upper portion
Build the upper portion
Build the top half, his portion 13, with sides that stand on the lower sides, a gabled roof 16, and an opening 15 matching the entrance. Nail strips 14 round its lower edge outside so they overlap the lower portion, shed water and make a tight joint.
Matériaux pour cette étape :
Planche de pin1 pièce
Clous galvanisés1 pièceOutils nécessaires :
Scie égoïne
Scie à chantourner
Marteau à panne fendue5
5
Fit the lift-off hinge
Fit the lift-off hinge
Screw a flat-bar plate to the back of each lower side, projecting behind, with a slot cut in its top edge (his plates 32 and slots 33). Screw a plate with a bolt as a stud to each side of the upper portion so the studs drop into the slots when the top is set down (his plates 34 and studs 35). The top now tilts back on the studs or lifts off.
Matériaux pour cette étape :
Plat en acier doux1 pièce
Boulon de carrosserie1 pièce
Vis à bois1 pièceOutils nécessaires :
Scie à métaux
Jeu de limes
Perceuse à colonne
Jeu de forets
Jeu de tournevis6
6
Fit the prop arm
Fit the prop arm
Hang a flat-bar arm from a hinge at the top of the back of the upper portion (his arm 24 and hinge 23). Join its lower part to a bracket on the lower portion with a link (his link 25 and bracket 28), slotted so it can be unhooked. When the top is tilted back, the arm swings down to the ground and props it.
Matériaux pour cette étape :
Plat en acier doux1 pièce
Charnière à lame1 pièce
Boulon de carrosserie1 pièce
Vis à bois1 pièceOutils nécessaires :
Scie à métaux
Perceuse à colonne
Jeu de forets
Jeu de tournevis7
7
Protect the entrance
Protect the entrance
Screw a strip of flat bar round the edge of the entrance, his iron band 31, where a chained dog wears it.
Matériaux pour cette étape :
Plat en acier doux1 pièce
Vis à bois1 pièceOutils nécessaires :
Scie à métaux
Perceuse à colonne
Jeu de forets
Jeu de tournevis8
8
Troubleshooting
Troubleshooting
Kennel troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
**John S. Minion** of Newark, US 920,975, dated 11 May 1909, filed 21 May 1908. He claimed "a kennel comprising a bottom portion having vertical sides, a top portion with vertical sides resting on the sides of the bottom portion, hinges connecting the sides of the bottom and top portions on one end, an arm swinging from its top end on the hinged end of the top portion, and a link pivoted to the bottom portion and to the arm". He gives no sizes; the pine, all sizes and the flat-bar and bolt fittings are ours.
Matériaux
6- 1 pièceEspace réservé
- 2 piècesEspace réservé
- 1 pièceEspace réservé
- 2 piècesEspace réservé
- 3 piècesEspace réservé
- 1 pièceEspace réservé
Outils requis
9- 1 vendor sell this, none ship to you yetEspace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Ce plan fabrique
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.


