Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
Woody

Créé par

Woody

14. novembre 2026NO
7
0
0
0
0

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)

A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
Intermédiaire
A day

Consignes

1

Sizes in mm

Chargement du notebook Jupyter…
2

Read the Boy Mechanic

"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3

Cut the parts to the drawing

Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
Scie à chantournerScie à chantourner
Ciseaux à boisCiseaux à bois
Vilebrequin et mècheVilebrequin et mèche
4

Turn roll A

Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.

Matériaux pour cette étape :

Goujons de bois durGoujons de bois dur1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
5

Assemble under the bench

Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.

Matériaux pour cette étape :

Vis à boisVis à bois1 pièce
Boulon de carrosserieBoulon de carrosserie1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
MarteauMarteau
6

Use it

To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7

Troubleshooting

Wooden vise troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.

Matériaux

4

Outils requis

5

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...